Anvil

Taking Beno’s advice, I secured mine a couple years ago and kept it locked away. The time is approaching for me to install it. 🍻

Awesome pictures and story from the 1999 ICE 225 Greenland crossing with 80’s :cool: You can read the full story here: https://arctictrucks.supportix.ru/static/uploaded/user/files/fourwheeler.com-ICE_225_-_The_Ice_Men_Cometh.pdf

You really should have more caster correction than the bushings. As for the tires, see if you can find a shop that can road force balance them. Someone here will know the machine used for that. A friend had issues and with the road force machine...

Yes, I did. I started with the transfer, rebuilding it for part-time 4WD and replacing every seal, bearing, snap ring and etc. along the way. Of course, I had Georg Esterer's excellent video series to nurse me through that. Now I am on the...

Bulbs any good? I know that sounds stupid, but people have rode around with only one working and didn’t know and then think they have a bigger problem than just bulbs when the one working one quits.

Yep. Every Oil Separator will be different....depending upon size, how the hoses must be routed and how it is emptied. The 'JEGS' unit I chose is fairly small and doesn't require much in the way of a special bracket (depending on where you...

Hello all, my Cruiser was stolen out of my parking lot on the 29th of June in Greeley, Colorado. It has been reported stolen and it has been searched for with no results, I fear its south and across the border. If anyone comes across any parts...

I just patched mine. Highly recommend it

I pulled mine out a few weeks ago and used an old soft shoe polish brush plus dawn and water to clean my seal gently. I was floored with the dirt and debris that came out of the edge seal. Then I did Jon Held’s trick with a wrap of butchers...

Have your tried adjusting the sunroof height? From inside the vehicle if you push up on the glass does it move significantly upward?? The glass (assembly) can sag allowing too much water to get past the seal, adding shims under the glass...

I used butyl window tape on mine until I deleted it. You can get it at any lowes or HD. It worked great and since it’s under your roof rack it shouldn’t matter what it looks like...

I'm tired of my sunroof leaking... I've cleaned the drains, probably not as well as I should have... but I gave it the old college try, and it still leaks inside. I have an ARB roof rack and NEVER use the sun roof. I'll eliminate the sunroof...

@Jorgito a couple picture you may like if you have not seen it before.

There is 1 relay that supplies +12 to all 4 bulb positions, and there are 2 fuses. 1 for left side and one for right side, both high and low beam. If the highs work in the flash position, but not when pushing the stalk to the high position, then...

I’d spring for the UC-10 as it fills the dash much better than the IC-7. I installed a UC-10 on my Tacoma and absolutely love it. However, I cannot bring myself to do it on the FZJ after considering all of the dash indicator lights that will...

NIce to know there's an upgrade option but if you add the optional bits the dakota digital price goes to $2300?? I think I'll have to stick with the old steam gauges for now.

But does it have locker indicators?

Just got the email today. Great news! We are a dealer for them (classic car shop). I’m sure this will be handy for many people doing swaps or just wanting modern functionality with stock looking gauges. These things are great and we use them in...

Getting ready for the hand over…basically unused and remarkably not lost…