PCV Hose #2 Leak (1 Viewer)

[landtoy80]

I am getting some leaking from PCV hose #2 on the valve cover.
I have replace the hose and even put a clamp on it and I am getting oil leaking out around the hose.
I replaced the PCV valve.
Is it that the motor is just getting tired and there is some blow by?

 

[NaterGator]

When I replaced the grommet my seep-through stopped and that area is now clean.

Before hand it looked like yours though. Is that a new grommet, and if so is definitely in good shape?

 

[RavenTai]

naw not worn out you just need a new hose, it likely has a crack in it,


Nator, the grommet is on the other PCV hose where the valve is. no grommet on this side,

 

[NaterGator]

Nator, the grommet is on the other PCV hose where the valve is. no grommet on this side,

;p Good call. These are the mistakes I make when I wake up at 2:30 pm

 

[landtoy80]

The PCV hose is new. The old one did it too, that is why I replaced it and then put a clamp on it.

 

[cpg]

Then the metal tube that is pressed in there must me bad