aaronrules
Coolest person you know!
I know I am going to killed by asking this question, but there are SOOOOOOOOO many threads out there with way too many opinions to try to put it all together.
I have my 2006 LX going to roll 200K soon, and I am trying to put together a list of things to do in order to keep it running for at least another 100K miles. My plan is:
- Replace all the fluids (diffs, transmission, brakes, oil, power steering, coolant, transfer case)
- Do a 90K service (water pump, timing belt, serpentine belt, thermostat, thermostat gasket)
- Rear upper control arms
- Rear lower control arms
- Front upper control arms
- Front and rear sway links
- Idlers
- Crank seal
- Cam seal
- Spark plugs
- Grease the drive shaft
I took this list off of the FAQ I think, or at least another thread where this is what someone did at 200K.
I also plan to replace the CV axles as I have just installed a Tough Dog lift from @TRAIL TAILOR . I also have the front UCAs and sway links coming from him as well. These are being done more because of the lift than preventative maintenance.
Things that have already been done:
- Heater T's
- Wheel bearings
- I know I am missing some other things
My question is; what am I missing. Let's go with the premise that this truck is in good condition...no rust and has been very well maintained its whole life. Also, let's go off the premise that my wife is going to kill me when I tell her all the stuff I need to get done before heading out to HIH this year...so no unnecessary items.
This doesn't really need to be a discussion about what part is the best, but OEM quality or better is what I am shooting for while getting the best deal I can get.
Also, the best instructions that are out there to perform all these tasks would be very much appreciated as well! I am not sure the 2004 FSM will cover all the things for my 2006, and some threads out there make my head hurt trying to figure it out. I think I am old and just can't remember anything anymore!
I really would appreciate any thoughts, comments, and suggestions form you guys!
I have my 2006 LX going to roll 200K soon, and I am trying to put together a list of things to do in order to keep it running for at least another 100K miles. My plan is:
- Replace all the fluids (diffs, transmission, brakes, oil, power steering, coolant, transfer case)
- Do a 90K service (water pump, timing belt, serpentine belt, thermostat, thermostat gasket)
- Rear upper control arms
- Rear lower control arms
- Front upper control arms
- Front and rear sway links
- Idlers
- Crank seal
- Cam seal
- Spark plugs
- Grease the drive shaft
I took this list off of the FAQ I think, or at least another thread where this is what someone did at 200K.
I also plan to replace the CV axles as I have just installed a Tough Dog lift from @TRAIL TAILOR . I also have the front UCAs and sway links coming from him as well. These are being done more because of the lift than preventative maintenance.
Things that have already been done:
- Heater T's
- Wheel bearings
- I know I am missing some other things
My question is; what am I missing. Let's go with the premise that this truck is in good condition...no rust and has been very well maintained its whole life. Also, let's go off the premise that my wife is going to kill me when I tell her all the stuff I need to get done before heading out to HIH this year...so no unnecessary items.
This doesn't really need to be a discussion about what part is the best, but OEM quality or better is what I am shooting for while getting the best deal I can get.
Also, the best instructions that are out there to perform all these tasks would be very much appreciated as well! I am not sure the 2004 FSM will cover all the things for my 2006, and some threads out there make my head hurt trying to figure it out. I think I am old and just can't remember anything anymore!
I really would appreciate any thoughts, comments, and suggestions form you guys!