2017 WTB want to buy thread (1 Viewer)

[cjmoon]

I'll start.

Looking for one 20mm rear fj80 spacer. I guess I'd buy 2.

Have new rear springs coming and want to level it out have a set of 30mm and ordered a little 10mm spacer to so I would have options. My last springs where about 20mm off side to side with my spare on the driver side interiors

 

[2fpower]

Looking for steel plate for welding bench. Need 3x6 or larger. 1/2 or thicker preferred.

 

[tornadoalleycruiser]

ha. my workbench is 2 pieces of steel plate approx 4x8 total thickness is about 3/4.. need a forklift or 2 floor jacks to move that thing.. BUT.. it does NOT move when yarding on something in the vise that is bolted to it!
Good for you in upgrading. might try equipbids? maybe a construction site will have something. I purchased a heavy duty workbench from them at one time but only wanted the vise (wilton machinist) off it. WOrkbench is at Jobe's as payment for picking it up.

 

[ariff]

Looking for a set of used or cheap plug wires for a 93 FZJ80.. PM me if ya have a old set ya wanna sell..

 

[shoresoccer13]

Looking for the 3rd row out of a 100 series gray interior year model of the LX is 2004 and third row seat belts. Now have just need to install belts.

 

[shoresoccer13]

Looking for steel plate for welding bench. Need 3x6 or larger. 1/2 or thicker preferred.

I may have something like that in my garage I will just have to fill in the hole it is covering. I will measure it and get back to you on dimensions this weekend.

 

[2fpower]

Thanks.

 

[shoresoccer13]

Thanks.

Ok it is about 60" by 66" by 0.5"

 

[2fpower]

wanted: warn 8274 winch vinyl cover for pattern. I want to make up a cover for my pretty winch.

 

[The Jayhawker]

Anyone have a good usable radiator for an 80?

 

[shoresoccer13]

Anyone have a good usable radiator for an 80?

I may have one once I pull it from the 94 I am parting out, though at present don't know where the coolant was leaking from so don't want to get hopes up

 

[half k cruiser]

Looking for a set of 3rd row seat rails, both sides.

 

[half k cruiser]

Also, if anybody has a junk birfield i'm in the market for one of those as well. Need it for an art project.

 

[The Jayhawker]

I have the third row stuff but I`d prefer to get rid of everything. No charge.

 

[2fpower]

Also, if anybody has a junk birfield i'm in the market for one of those as well. Need it for an art project.

I will have to look. Should have one. Used the last one to make the carnage award. Wonder where BRKNBIRF got its name.....

 

[half k cruiser]

I will have to look. Should have one. Used the last one to make the carnage award. Wonder where BRKNBIRF got its name.....

I didn't realize there was a carnage award. Surely @FZJ80 in KC or @Robkc is the raining champ ? I'm strictly basing this on body damage and nothing else, no offense intended.

 

[2fpower]

Erik Jobe got it 2015 and 2014. busted diff and transfer case parts if I recall trying to go up something crazy.

Don't recall the winner in 2016.

 

[FZJ80 in KC]

I didn't realize there was a carnage award. Surely @FZJ80 in KC or @Robkc is the raining champ ? I'm strictly basing this on body damage and nothing else, no offense intended.

None taken!! While not the award winner, I have been the contributor of the trophy material for sure!

 

[Robkc]

I didn't realize there was a carnage award. Surely @FZJ80 in KC or @Robkc is the raining champ ? I'm strictly basing this on body damage and nothing else, no offense intended.

Uh, that'll buff right out. I know a guy with an awesome set of tools.

 

[SammyT96LX450]

Looking for a set of 3rd row seat rails, both sides. View attachment 1406168

I believe I have a set you can have. Let me look