WTB / Needed Thread 2014

[2fpower]

Needed..... anyone ever repaired carbon fiber on a bike?

 

[trainrech]

How severe?

 

[2fpower]

Very small, but on the downtube. About 3/8 round flap. I bought a kit on ebay to fix, just wondering if anyone has done this before. Youtube makes everything look easy.



http://www.instructables.com/id/Repairing-a-Carbon-Fiber-Bicycle-Frame/?ALLSTEPS

 

[tornadoalleycruiser]

need a pinion flange.. hard to believe i found about 4 of em in the garage.. but need this particular one for now..
http://cruiseroutfitters.com/tech_flange.html
need 1/74 to the end of course spline 78.. I can continue to tear the garage apart and will probably find one..
also need an FJ60 or FJ62 brake light switch.. Will order one when i make a parts order or i might be able to find mine.. all this stuff used to be in the garage.. who knows where it all went..
I'll replace things if I use them.. I've been known to loan stuff out so me asking isn't entirely normal..
That will complete my driveshaft project till i swap diffs out to fine spline..

 

[kc_chevota]

I have a switch, and will check on the flange

 

[tornadoalleycruiser]

Ordered a switch $2.50. It was the 2 prong variety. Flange I will need still. Ill keep looking. Thanks Rob.

 

[trainrech]

I've think I still have the axles off a 73. Would that work?

 

[tornadoalleycruiser]

Ill send u a link. Chef might have one on the shelf. Ill keep looking this weekend. No hurry its for the front. Dont need to have a front shaft installed to test drive.

 

[tornadoalleycruiser]

I can also check spare diffs. I think all my spares are fine spline tho

 

[2fpower]

Come down and check my parts anytime.

 

[kc_chevota]

Kelly no one wants to check your parts.

 

[2fpower]

Excuse me while I whip this out....

 

[tornadoalleycruiser]

Found my brake light switch. No flanges in my pile o parts. Well. None that met my immediate need that didnt require pulling the whole axle apart.

 

[The Jayhawker]

Looking for a front bumper for my 94 LC. Previous owner pretzeled it. Stock or ?

 

[tornadoalleycruiser]

Thanks kelly . Had the flange I needed and was half mile from a open house we were going to.

 

[half k cruiser]

Looking for a front bumper for my 94 LC. Previous owner pretzeled it. Stock or ?

I should have one available very soon.

 

[tornadoalleycruiser]

TTT..
Eric Jobe needs a 4.7 gearset to go into a minitruck case.. prefer Marlin gearset to match what he blew up

Erik Christiansen.. Need a couple driveshaft dust covers off Fj60 or FJ62 driveshafts.. so i can finish up my driveshafts for the FJ45..Also needing a replacement double drilled fine spline pinion flange.. I loaned one of my spares out a year ago to a club member and it never made it home.. need to finish up that ARB diff..

 

[ASI H8]

TTT..
Erik Christiansen.. Also needing a replacement double drilled fine spline pinion flange.. I loaned one of my spares out a year ago to a club member and it never made it home.. need to finish up that ARB diff..

Working it with marlin now.

 

[ASI H8]

..Also needing a replacement double drilled fine spline pinion flange.. I loaned one of my spares out a year ago to a club member and it never made it home.. need to finish up that ARB diff..

Flange is on its way. Along with perches.
Called Marlin 4 times today. Never got through.

 

[2fpower]

Needed --

Anyone braze aluminum tubing? came to realization that I need to braze the A/C dryer relocation lines.

Thanks!