WTB / Needed Thread 2014

[kc_chevota]

cool will download tonight

 

[weejub]

I am looking for a power steering pump for a 1985 4Runner. I may just rebuild the one I have, unless someone has a good used one for much less than a new/rebuilt one. I am also taking advice on either path

 

[tornadoalleycruiser]

Rob might have some in a pile of parts we acquired

 

[kc_chevota]

I think they were removed will look

 

[weejub]

Thanks!

 

[kc_chevota]

rear driver side tail lens lx450/fjz80

 

[kc_chevota]

Weejub sorry no Ps pump on the engine.

 

[2fpower]

rear driver side tail lens lx450/fjz80

Time for deletes!! I have a kit to do it. A 2'x2' sheet of metal.

Ebay is the place to get these.

 

[kc_chevota]

not the side marker, the stop/turn cover

 

[2fpower]

Somebody stole all my tail lights and side markers!!

Nobody respects those damage magnets anymore.

 

[weejub]

Weejub sorry no Ps pump on the engine.

Rob - thanks for looking! I will go the rebuild route

 

[2fpower]

This have any parts you all have been asking about?

http://kansascity.craigslist.org/cto/4685907815.html

 

[weejub]

This have any parts you all have been asking about?

http://kansascity.craigslist.org/cto/4685907815.html

Yea - Thanks for sharing - I may need some other stuff like some PS hoses, or if that PS Pump is clean, I may go that route. I wonder if I could take out his entire AC system and plug it into mine Thanks, Kelly.

 

[R.E.M.]

What's wrong with this effing picture?

The guy that did the 3B swap kept the 2F motor mounts. And I bought new 3B mounts yesterday at Molle.

Anyone have new 2F mounts? I'll likely swap these out at Molle this week. And get the tranny mounts too.

 

[2fpower]

So, are you needing the rubber 2f mounts or the actual structural mounts to the engine? Would a fj40 mount work?

 

[R.E.M.]

I need the actual 2F rubber sandwich mount for the FJ60. I've read that the 40 mounts are not as strong.

Right now I thru bolted the old mount to see what it would do. It's rough, but I might have compressed the rubber more than necessary.

I can easily order a mount from Cruiser Outfitters if needed. Unless someone has one laying around!

 

[tornadoalleycruiser]

Like i said on the phone.. i prob have some lying around but they're 30 years old. get new ones coming and avoid the headache later.. once and done.. your thru bolt will hold and also be your trail spare.

 

[2fpower]

I have some woodworking projects on the Horizon, but need some equipment. Would love the festool domino, but price is too high for my blood, so looking to build a slot mortiser. Needing some 8020 material and bearings. Anyone have a source for these goodies?

 

[ASI H8]

Remove. Found some. 16x10 wheels with less than 4" BS. 35x12.5 tires. I need to source wheels and tires for the Samurai. I’m posting it here because the Samurai is sitting on FJ40 LC axles.
Wheels need to be 16” or 17” with 4” or less backspacing. I’d like the width to be between 8” and 10”. I could go with wheel spacers (that I don't have) but I prefer not to.
Tires should be between 33” and 35” x 10.5” to 12.5”, all or mud terrain.
PM me or give a call. My number is on the member roster.

 

[trainrech]

Looking for (1) #20 in the attached pic. Rear tail light splash guard.
Also in the market for a used but decent lower windshield seal.