Who's the best OEM parts provider?

[alp61]

Looking to tune-up my 80 and was wondering who is the best (and cheapest) OEM parts provider. Parts needed:
1. plugs
2. wires
3. rotor and cap
4. air filter

Looking at previous posts, it appears that the consensus is to go with OEM. Any help is appreciated.

Eric

 

[Koffer]

Looking to tune-up my 80 and was wondering who is the best (and cheapest) OEM parts provider. Parts needed:
1. plugs
2. wires
3. rotor and cap
4. air filter

Looking at previous posts, it appears that the consensus is to go with OEM. Any help is appreciated.

Eric

right here eric
https://forum.ih8mud.com/showthread.php?t=17873

 

[turbocruiser]

Looking to tune-up my 80 and was wondering who is the best (and cheapest) OEM parts provider. Parts needed:
1. plugs
2. wires
3. rotor and cap
4. air filter

Looking at previous posts, it appears that the consensus is to go with OEM. Any help is appreciated.

Eric

Most definitely go with OEM; every time I did not, I did not like the results. And, most definitely go with CruiserDan for parts, he is here all the time, contact him via PM, you are also able to contact him at the American Toyota Link that will flash within a refresh or two at the top of the screen, I would write the number out but its on my speed dial! Great guy, great parts, great prices and poster child for the SPCA all at once!!!

 

[OGBeno]

Get in touch with Dan...he really is quite an important OEM source for your rig. He's also very helpful on the phone--patient and talks from knowledge.

Also, you get to feed his doggs for him too!



-onur
Akron, OH

 

[loquito]

(oking to tune-up my 80 and was wondering who is the best )


DAN,even if it need shipping to far away places.
S

 

[alp61]

Thanks! Cruiser Dan it is.

 

[Beowulf]

Eric,

There are plug wire resistance specs posted here in the archives and in the FSM. You might find yours are within spec and don't need to be replaced unless they are otherwise damaged.

-B-