Whats the best way to fix this, oil leak

[Faab]

Other than this, I also have shuddering on 4th-5th gear on 35-45 mph speed, mainly on uphills.

Planning to change the spark plugs too

 

[willmtaylor]

As I told you in the Fb group, I’m fairly certain the 2 are unrelated. You need to search the 100 series threads for “washboard” and “shudder” and you’ll find the threads discussing ‘04-‘05 models with this issues and the TSB that Toyota issued regarding the shudder.

Washboard vibration

forum.ih8mud.com

I Need a Good Mechanic!!

Hey guys, I have a 2004 LC that needs a new torque converter according to Toyota. They want to charge me $3300 to replace it. Can someone honestly give me a good suggestion for a mechanic in the Portland, OR surrounding area that's familiar with these LC's? Also, what cost should I really be...

forum.ih8mud.com

2005 LX transmission fluid q's

Finishing up baselining my fluids...unless I'm totally missing something, this is a sealed transmission (?), no dipstick/fill tube. In all the threads on MUD about draining/refilling, pulling the pan, flushing (or not flushing), etc., there seems to be little mention of this "feature". Is this...

forum.ih8mud.com

2004 Transmission Issue - Washboard Vibration, Shudder

Long-time lurker. Have an '04 LX 470 purchased pre-certified in 2008 with approx. 46k that now has approx 108k. At about 102k, started experiencing vibration at around 30-35 mph when the trans tries to shift up. Does not vibrate when coasting, only when lightly accelerating. Vibration is...

forum.ih8mud.com

 

[delz05]

Bring it to a Toyota mechanic who knows this platform, ask for a diagnosis and estimate for repair. Expecting an in depth resolution on a forum without providing any information is a bit much...

 

[Trunk Monkey]

Guessing that's your transmission cooler lines and if they're leaking, you're low on fluid, so I'd check that and then see where the lines are leaking from. More info helps with better answers.

 

[excessive]

those lines like to rust in northern climates, you probably have a rust hole forming

 

[Faab]

I was confused what hose are those,

 

[Faab]

This is where it is leaking exactly

 

[OEMGUY0720]

That’s the hardline of your AT cooler. Easily replaceable. And, when you replace that, replace the hose AND hose clamp as well as it is not recommended to reuse the old hose. That has reached its end of life.