Up to what Size of winch can you fit on an
Arb Bumper.
Have Access to a 12000 #
Any News.............
Arb Bumper.
Have Access to a 12000 #
Any News.............
What Size of Winch fits the ARB Bumber (1 Viewer)
- Thread starter Landcruiser97
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I have a Warn M12000 that fits like a glove in my ARB.
TK
TK
It was originally desiged for the M10K which is no longer in production. M12K fits fine and some reports of the M15K as well.
- Thread starter
- #4
That's a Winner on my Side
will post Pictures soon
will post Pictures soon
- Thread starter
- #5
Its a Mile stone SI 12000# Winch
will that fit on the ARB Bumper as well?
will that fit on the ARB Bumper as well?
Never heard of the brand. I would recommend staying with something that has some type of track record to help make a choice. There is a trade off between budget and reliability that you can read about to find a winch that fits your needs.
Nearly any planetary gear winch will fit with the possible need for some spacers such as these. I had to use them to mount my 12.5k Superwinch and a 10k T-max (Smittybilt) in another truck.
- Thread starter
- #7
Found a Great used ARB Front Bumper for MY LC 80
with Winch Access and Bull bar,
One side had a slight Bent , appr. 2" squizzed in.
I will pick it up Tuesday again......found a great Welder
up here who fixes it for $ 40.-
Will post Pictures soon with NEW Mounted ARB.....................thrilled about it.
Will than Install the Mile stone SI 12000# Winch
It is never Been used and traded it in for my Factory Bumper
and Brush guard........seems a Good trade for me.
with Winch Access and Bull bar,
One side had a slight Bent , appr. 2" squizzed in.
I will pick it up Tuesday again......found a great Welder
up here who fixes it for $ 40.-
Will post Pictures soon with NEW Mounted ARB.....................thrilled about it.
Will than Install the Mile stone SI 12000# Winch
It is never Been used and traded it in for my Factory Bumper
and Brush guard........seems a Good trade for me.
i've got an m15000 in mine
- Thread starter
- #9
Got my ARB Bumper back today
What a Deal I got.....found it on Craigslist
and installed in a Heart beat...............very nice
Still needs a little Paint Touch up.
will install the 12000 pound over the Weekend
What a Deal I got.....found it on Craigslist
and installed in a Heart beat...............very nice
Still needs a little Paint Touch up.
will install the 12000 pound over the Weekend
what did you pay for it?
- Thread starter
- #11
I'm nearly ashamed to tell
$ 165.-...............
$ 165.-...............
- Thread starter
- #13
Yeah
ARB 165.-
Traded the old Bumper and Brush guard
for a 12000 Winch.............................
Love it
ARB 165.-
Traded the old Bumper and Brush guard
for a 12000 Winch.............................
Love it
Be very ashamed!! 
But good for you
Enjoy that deal.......
But good for you
Enjoy that deal.......
I promise I won't tell anybody... Can't wait to see it up close- off road trip in the near future.
Oh and almost for got I heard you installed the h-lift on the roof need to see that too, please!
Last edited:
I still think it's a great deal
- Thread starter
- #17
Ok, ARB Bumper is Complete
Just debating for Fog lights or Turnlights
Leaning more towards Fog Lights...........
The whole Bumper is sanded Down
and Rattle Can Sprayed.
# 12000 lbs Winch is mounted............
fitted like a Glove, all tested and works great.
Ready to go for the Next Trip
Just debating for Fog lights or Turnlights
Leaning more towards Fog Lights...........
The whole Bumper is sanded Down
and Rattle Can Sprayed.
# 12000 lbs Winch is mounted............
fitted like a Glove, all tested and works great.
Ready to go for the Next Trip
WHOAAA!!!!! What a great deal, lucky guy.
I was about to tell to see mounting sizes specifications for the Mile Marker 12000 and compare it with the W 12000, but looks like you found it out. I used to have a W10000 on a 40.
& 
I was about to tell to see mounting sizes specifications for the Mile Marker 12000 and compare it with the W 12000, but looks like you found it out. I used to have a W10000 on a 40.
&
Good score! I had a feeling you intended to say mile marker and not mile stone.
It appears you had to use a mounting plate, correct? Any winch above 10k lbs needs to be mounted feet forward in the bumper which is how ARB designed the bumper, especially if they are going to be used near their capacity. If that mounting method is not possible, the largest standard grade8 or metric class 10.9 bolts should be used in every location possible.
It's hard to tell in your pictures but the top of the fairlead should be right up against the protruding mounts in the bumper. The two side roller pins should then be replaced with bolts and the fairlead secured to the bumper.
It appears you had to use a mounting plate, correct? Any winch above 10k lbs needs to be mounted feet forward in the bumper which is how ARB designed the bumper, especially if they are going to be used near their capacity. If that mounting method is not possible, the largest standard grade8 or metric class 10.9 bolts should be used in every location possible.
It's hard to tell in your pictures but the top of the fairlead should be right up against the protruding mounts in the bumper. The two side roller pins should then be replaced with bolts and the fairlead secured to the bumper.
Last edited:
- Thread starter
- #20
yes, i used a Mounting plate
secured that also through the arb Frame using
metro class 10.9 bolts,
You are right, did not got the bolts yet for the fairlead
to proper secure the side roller Pins................next Phase
Thanks for all the good Advise
secured that also through the arb Frame using
metro class 10.9 bolts,
You are right, did not got the bolts yet for the fairlead
to proper secure the side roller Pins................next Phase
Thanks for all the good Advise
