What have you been doing with your Toyota? (4 Viewers)

[CCRider]

Tire Update:

So I got my new Toyo MT Pizza Cutters (255/85/16) and I really like them. I gained 1.5" of clearance. Granted, my previous tires had 25K miles on them (and were somewhat worn), but still impressive. I am going to do a road test later this afternoon. They are a little noisier, but remember I have the rear seat deleted and haven't put in insulation yet. I will take a new decibel measurement as well and better pics.

Were your previous tires the original Goodyears? If so, these will likely be a HUGE improvement off-pavement.

 

[406Camper]

Were your previous tires the original Goodyears? If so, these will likely be a HUGE improvement off-pavement.

@CCRider, Yes. Stock. I am expecting much better off road handling.

 

[YotaPaullie]

Washed mine today and then it rained. You’re welcome if you wanted rain.

 

[406Camper]

Better pics of my Pizza Cutters as promised and other recent installs. The new spare barely squeezed in there. New hardware for my BAMF Rear Dif Skid Plate as well. WKO Rocksliders off to powdercoat tomorrow.

 

[REZARF]

Looking good Mark!

 

[JohnnyOshow22]

Put a new u joint in the front drive shaft on my 80 this morning and dropped off the 40 to get a new windshield installed, even though it was 30 degrees the 15 minute ride to the shop wasn't bad without a top on. Looking forward to driving it all summer. Photo of the windshield was from 2 weeks ago but you can see it's not great lol

 

[Bowser]

Getting a bunch of PM work done on the fleet. Each rig etc have punch lists. Work season will Be here soon. Heading to UT this weekend to pick up another work truck. 99 limited 4runner thats built.

 

[YotaPaullie]

even though it was 30 degrees the 15 minute ride to the shop wasn't bad without a top on.

You didn't have to go topless.... You could have at least worn a jacket..... I mean what did the neighbors think? (Sorry, bad dad joke.... just ignore the guy behind the keyboard)

 

[1jzhilux]

New tie rods, brake lines, transmission mount and shocks. Plus a quick check to make sure the shocks work.

 

[finally]

We’ll friends after 8.5 months, I finally parked her in the garage yesterday. Had drivers floor pan, bed pan, rear sill, and both rear corners rust cut out, replaced and painted. Started putting her back together today but plenty more to do. So far I put a wood floor underpayment down just fun, it’s only 2mm but I think will add some sound deadening and heat protection, the damn thing was gutted so why not . Finished interior. After lunch I’m going to have clean drivers door and ambulance doors and re hang my weather stripping. With doors off for so long and I had just redone the weatherstripping, it’s all peeling and catywampus and crap. Plenty more to do. But feels good to have her home. I’ve been working pretty quick but tried to snap some pics along the way. Happy Sunday

 

[JohnnyOshow22]

We’ll friends after 8.5 months, I finally parked her in the garage yesterday. Had drivers floor pan, bed pan, rear sill, and both rear corners rust cut out, replaced and painted. Started putting her back together today but plenty more to do. So far I put a wood floor underpayment down just fun, it’s only 2mm but I think will add some sound deadening and heat protection, the damn thing was gutted so why not . Finished interior. After lunch I’m going to have clean drivers door and ambulance doors and re hang my weather stripping. With doors off for so long and I had just redone the weatherstripping, it’s all peeling and catywampus and crap. Plenty more to do. But feels good to have her home. I’ve been working pretty quick but tried to snap some pics along the way. Happy Sunday

View attachment 2944912

View attachment 2944913

View attachment 2944914

View attachment 2944915

View attachment 2944916

This is awesome!

 

[pigmony]

We’ll friends after 8.5 months, I finally parked her in the garage yesterday. Had drivers floor pan, bed pan, rear sill, and both rear corners rust cut out, replaced and painted. Started putting her back together today but plenty more to do. So far I put a wood floor underpayment down just fun, it’s only 2mm but I think will add some sound deadening and heat protection, the damn thing was gutted so why not . Finished interior. After lunch I’m going to have clean drivers door and ambulance doors and re hang my weather stripping. With doors off for so long and I had just redone the weatherstripping, it’s all peeling and catywampus and crap. Plenty more to do. But feels good to have her home. I’ve been working pretty quick but tried to snap some pics along the way. Happy Sunday

This has been a long time coming! Great news. We probably need to put together another 40's only run this year to get some dirt on it.

 

[finally]

Oh

This has been a long time coming! Great news. We probably need to put together another 40's only run this year to get some dirt on it.

Oh yes!!!!

 

[finally]

-

 

[REZARF]

Knocked out three more 100 series preps...

New muffler installed.
Fresh alignment on the front end.
Rotated the tires.

 

[Bowser]

Picked up newest training rig.

 

[REZARF]

Looking good Bowser

 

[Tanaman]

Supercharged 3rd gen?! Very nice! Looks pretty well put together already

 

[Bowser]

Stage 5 Icon suspension
Full belly Skids
And some go fast bits.
I’m going to pull all wiring etc and clean up all the installs. Truck has a bunch of extra electrical crap because apparently noise is good.

I have a project in some salt flats and desert later this year. Building this for that.

 

[90WT]

Rack-ectomy.