CCRider

I believe the FSM specifies a 625rpm idle.

Had the tires off the pickup to rotate them the other day and noticed that one of the calipers had seized up and would be wearing through the pad in short order. I also noticed a little wandering and found that my outer tie rod ends were pretty...

You skipped past the how part. How & what did you use to fill the holes. Please link any resources. Thanks, Im half decladded myself.

The tubes of JB are spreadable.

If you aren't sold on the idea of owning an 80 or aren't really into the hobby/business of car maintenance and restoration then it seems smart for you to step back and re-assess. Only you can figure out what you value and the best alignment of...

Oh and give the paint on the rest of the truck the best buff/polish you can.

In. Maybe we can see a bear on this run too?

There's a myriad of products that will extend your hitch stinger to whatever length you need, FYI...

Had several wheel locks break. Never again.

The key-way of the keyed lug socket can break. Not a huge deal if it happens at your dealer while they’re rotating the tires...they can order a new one. It IS a big deal if you’re out and about, or off road. I‘ve replaced all mine with standard...

Just for the record that is not a Tahoe, but it is Toyota bringing back the Land Cruiser Code Named the FJ350H. It is a hybrid wrapped in a Tahoe skin. Really impressive that Drew can line up these prototype vehicles. Unfortunately, we all had...

Got a house in the spring from 1916. Foundation is good. But center of the house was sagging a bit. Understandably since it’s so old. So it’s always good to have a dozen or more land cruiser jacks around. Leveled both sides of the house. Working...

PM = P of M I've had a stash of PM parts for my 80 hanging around my shop for a while and finally took the plunge this weekend. I replaced all the rad hoses, the PHH, thermostat, and all three belts, and all of the sway bar bushings. I learned a...

Yikes. That's a lot of rot. I've done two solar systems on two trailers. Send me a PM. Happy to share what I know.

I told myself that while wheeling Black Bear a few years back....

Thanks to Drew for getting this group together. Good times! Pics or it didn't happen? Well here ya go! Lots of happy faces! (and one inflamed one 😵, but still smiling) Strap it down and move it out....even on a Chevy! Future Xmas trees...

Had a great time... One 80, one 100, two 4tunners and a Tahoe. We stirred a bear and cub from their den about 30 feet from our chosen tree, we’re all safe and sound but it was quite chaotic for a few minutes there locating the kids and others.

Curse of the J#&P!

New bar is looking good!

F my kids going to college... order form completed.

I also have zero confidence with them after the pavement ends. I was very happy with them in snow (on the road) but had a random stick go through the sidewall about 25 miles from anywhere. Couple that with the fact that the key for my locking...

Thanks @CCRider ! I thought about getting them studded, since I am outside of town and the country roads can be pretty sketch after a cold night and some snow. I figure worse thing (other than an accident) is that I don’t like them and I can...

My wife had Cooper winters on her Outback and they were unstoppable.....unless you wanted to stop. They were a surprisingly capable choice. Can't speak to the sizing though.

Drew, thanks for organizing this. I think the day after thanksgiving is a great time to get out and really get that holiday spirit rolling. We’re gunna miss this one. Had a window yesterday afternoon and hit the local mountains and grab ours...

Drew, It would be great to join you even though we're not searching for a tree, yet. Always happy to get in some snow wheeling and my pup's always up for a ride!