She done!
What did you do with your truck this week?
- Thread starter BMThiker
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Installed a grab bar, and put the back seats back in. Now I'm saving for my suspension
Trying to decide what to do with this.
Give it to me!
Send it to Charleston
While both of those are great offers, I mean I'm flattered y'all think its work so much but its looking like it will be my DD for a few years. I picked up an 07 4runner limited, 4wd,v8 and the wife was driving it more than her 2012 Maxima. Being we had the title to the Maxima that offer us a chance to free up some cash before the baby gets here. Im a yota guy so I don't mind driving this thing for ever. Just need to figure out why the ac don't come on.
NCFJ
Supporting Vendor
Over 11 hours of wet sanding with 2000 grit and buffing out on Heather's 80, tons of work but what a huge difference it makes. The photos do not do it justice
Sanded
Shiny
Sanded
Shiny
NCFJ
Supporting Vendor
I built that bumper. It is a 3 piece modular design. Pics of assembly here https://forum.ih8mud.com/threads/baw80-bad-a-wifes-80-a-build-thread.841170/
I am heading out to finish up the wax now, tons of work but it looks like a different truck. Heather asked if I was doing the pick up next.....
I am heading out to finish up the wax now, tons of work but it looks like a different truck. Heather asked if I was doing the pick up next.....
jfz80
Cruisin’
MT Tube doors and a car show ...
Got my new O2 sensors in this morning. It was way more complicated than it should have been. All the nuts came off pretty easy, but the PO of my truck installed the EMS exhaust. The wiring harness on my new front O2 sensor wasn't long enough.
Once I took the old one apart to see how much longer the wires were I saw that he had spliced about 6 extra inches of wire in. I didn't want to do that. So I ended up opening up the factory wire loom and moving the O2 wires forward several inches. So, at least it will be easy for future repairs now.
Also, extended my diff breathers and change out front diff fluid. There was a decent size metal sliver in there, but nothing sounds broken or anything and 4 wd is working fine. I'll change it again in a few weeks. Also, my driver side front hub started leaking. I'm going to procrastinate this as long as possible. I hate working outside when is 100 degrees.
Once I took the old one apart to see how much longer the wires were I saw that he had spliced about 6 extra inches of wire in. I didn't want to do that. So I ended up opening up the factory wire loom and moving the O2 wires forward several inches. So, at least it will be easy for future repairs now.
Also, extended my diff breathers and change out front diff fluid. There was a decent size metal sliver in there, but nothing sounds broken or anything and 4 wd is working fine. I'll change it again in a few weeks. Also, my driver side front hub started leaking. I'm going to procrastinate this as long as possible. I hate working outside when is 100 degrees.
Oh no.... that sucks
OH, Jimbo, is that yours???
jfz80
Cruisin’
Damn Jim. Sorry to see that.
Time for a buy back and buildout??? Best of luck whichever way you go.
Time for a buy back and buildout??? Best of luck whichever way you go.
