Welder & Mechanic Needed

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 13, 2008
Threads
18
Messages
231
Location
Maricopa, Arizona
I almost have the Pig ready to drive. I had the fuel tank boiled, carb rebuilt, new brake master cylinder & shoes all around. It starts right up but needs to have the valves adjusted as well as dialing in the carb. I've been trying to get it mechanically sound before our third kid is born (March 13th) so I'm getting down to the wire.

I picked up some Ford F-250 Front seats and need a bracket made to mount them. Anybody here do that kind of stuff? I've had a couple of guys offer but every time I call they are too busy. Thanks,

Chet

Some pictures of the spray-in bedliner and misc. stuff

IMG_6800.jpg


IMG_6801.jpg


IMG_6731.jpg


IMG_6799.jpg
 
Here's a front on picture of the seats. The back mounts are flat but the front's are at a weird angle.

IMG_6650.jpg
 
Howdy! Shouldn't be too hard to do. A piece of angle welded to the floor leftyrighty, and then drill holes to match where you want the height. Weld blind nuts on the back of the hole. Pretty easy. Square tube or angle to raise the back mounts to where you want them. Did it on my Piggy about 20+ years ago. Call me at 480-899-5502. John
 
Love the liner on the inside. She's gonna be a beauty! Keep us updated with pics as it progresses...

:popcorn:
 
Contact JustWeldit here on the board. He uhm... welds. He's up in Fountain Hills though.
 
I like the idea that BMAN thinks of Fountain Hills as "up" :flipoff2:
 
From my place... it is UP. Both on a map and in elevation. Therefore "UP in Fountain Hills" is a relative statement. That said, if I were talking about a class of people, I would have said "Down in Fountain Hills". But a geographical location in comparison to the geographical location of the original poster is what I was speaking of at the time.

:flipoff2:
 
Last edited:
Thanks for clearing that up...












:lol:
 
Thanks for the replys and geography lesson. Inkpot and I are going to try and meet up this weekend and figure something out. Can't wait to get this piggy on the road.
 
From my place... it is UP. Both on a map and in elevation. Therefore "UP in Fountain Hills" is a relative statement. That said, if I were talking about a class of people, I would have said "Down in Fountain Hills". But a geographical location in comparison to the geographical location of the original poster is what I was speaking of at the time.

:flipoff2:
class down?

Thanks for clearing that up...



:lol:
im glad you under stand , because it sound like he said,"lower class? " maybe getto well if the shoe fits :flipoff2:
 
class down?

im glad you under stand , because it sound like he said,"lower class? " maybe getto well if the shoe fits :flipoff2:

Look at you two... all sharp an s***. I'm so proud of you... it's like watching your baby take their first steps.

Speaking of shoes. You still rollin' with the velcros?:flipoff2::flipoff2:
 
velcro shoes? no ....but i do have nice pair of slip on sketchers:lol: .... boots with shorts more my style:hillbilly:
 
I do boots and shorts too... Just not the tall Redwings contractor boots like yours.
 
Did someone say boots?

37desert511.gif


Oh and NO ONE noticed my pun... :rolleyes:
 
I saw it Mark, but didnt laugh until a half an hour later. i need more coffee!
 
Back
Top Bottom