Good evening team,
I am new to the landcruiser gang and ih8mud forums but long time lurker. I have recently acquired a 1999 105 series base model so with a manual transmission and the diesal 1hz with a turbo kit installed.
I absolutely love it but have had an issue I haven't been able to narrow down since I bought the beauty, I realised early on in the piece that my low beams weren't working and neither were the dash lights when trying to drive at night time. The only lights I can get to work are the high beams when being pulled in not pushed out. When high beams are pulled in it also makes the lights on the dash work too. I have checked and replaced a few fuses at the fuse box inside the vehicle (gauge and tail) but no change, I've also checked all the fuses at the box in the engine bay and all are okay aswell.
I'm sorta new to all this and working on my own cars but I'm keen to learn and have a crack. If anyone has any ideas I would be forever grateful
TIA,
Sibby
I am new to the landcruiser gang and ih8mud forums but long time lurker. I have recently acquired a 1999 105 series base model so with a manual transmission and the diesal 1hz with a turbo kit installed.
I absolutely love it but have had an issue I haven't been able to narrow down since I bought the beauty, I realised early on in the piece that my low beams weren't working and neither were the dash lights when trying to drive at night time. The only lights I can get to work are the high beams when being pulled in not pushed out. When high beams are pulled in it also makes the lights on the dash work too. I have checked and replaced a few fuses at the fuse box inside the vehicle (gauge and tail) but no change, I've also checked all the fuses at the box in the engine bay and all are okay aswell.
I'm sorta new to all this and working on my own cars but I'm keen to learn and have a crack. If anyone has any ideas I would be forever grateful
TIA,
Sibby
