Vulnerable 1997 part on the trail: (1 Viewer)

[Tools R Us]

Sleave them slightly longer? Longer lowers would increase the shaft to pinion angle? Sleave meaning?

Cut them in half, get some tube that slips over the stock tube and weld them back together slightly longer.

 

[ShottsUZJ100]

So you basically have installed Slee's 4" kit substituting the coils with OEM heavies - for a 25% less stiffer ride - yes?

Right on. OME heavies and J-springs. Though I didn't buy everything at once LIKE I SHOULD HAVE. Now, I wait for more parts during each phase. I tried to get away cheap. WRONG! I should have LISTENED to Slee!

 

[ShottsUZJ100]

Cut them in half, get some tube that slips over the stock tube and weld them back together slightly longer.

Hmmmm. I run this by Robert.

 

[80transit]

anyone make a kit for this?

Ray
1993 FZJ80

 

[Tools R Us]

Sleave them slightly longer? Longer lowers would increase the shaft to pinion angle? Sleave meaning?

Like this.
https://forum.ih8mud.com/showthread.php?t=60801

 

[ShottsUZJ100]

Like this.
https://forum.ih8mud.com/showthread.php?t=60801

I remember that. How long should it be? You can't preset with the rear wheels off the ground and ya can't adjust with them on the ground?

 

[Tools R Us]

Call me, check your PM.

 

[sleeoffroad]

Right on. Though I didn't buy everything at once LIKE I SHOULD HAVE. Now, I wait for more parts during each phase. I tried to get away cheap. WRONG! I should have LISTENED to Slee!

Can I use this as a tag line?

 

[ShottsUZJ100]

Can I use this as a tag line?

NO. I NEED THOSE UPPER CONTROL ARM ADJUSTERS NOW! ;p

What's up?

 

[NorCalDoug]

Right on. OME heavies and J-springs. Though I didn't buy everything at once LIKE I SHOULD HAVE. Now, I wait for more parts during each phase. I tried to get away cheap. WRONG! I should have LISTENED to Slee!

Live and learn John...live and learn

This is why I'm patiently collecting all the bits I will need and will make the jump up to 6" springs when I have everything.