Volk Racing TE37XT SL M-Spec Wheels Fitment Help! (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Anyone have experience with Volk TE37XT M-spec wheels on our 200‘s and if they would fit?

The size I am looking at is the only one they offer in out bolt pattern.

Link - Volk Racing TE37XT SL M-Spec Wheel 18x9.5 5x150 0mm Pressed Graphite | WVDOX00LPG - https://www.vividracing.com/volk-racing-te37xt-mspec-wheel-18x95-5x150-0mm-pressed-graphite-p-154756232.html
Anyone have experience with Volk TE37XT M-spec wheels on our 200‘s and if they would fit?

The size I am looking at is the only one they offer in out bolt pattern.

Link - Volk Racing TE37XT SL M-Spec Wheel 18x9.5 5x150 0mm Pressed Graphite | WVDOX00LPG - https://www.vividracing.com/volk-racing-te37xt-mspec-wheel-18x95-5x150-0mm-pressed-graphite-p-154756232.html

View attachment 3143095
I have used TEs on LC 100 & 200s. feel free to reach out via instagram @rwbmedusa
 
SEMA 2022 debut for the TE37XTSL wheels

07.png


06.png


Screen Shot 2023-09-14 at 7.09.03 PM.png


Screen Shot 2023-09-14 at 7.09.59 PM.png
 
I have the wheels. Honestly not sure what the bore is but I cannot even fit the pass through center caps to make the wheel fit so I’m sure it’s the hub centric version,

These are Falke Wildpeak 295/70/18
I had to make adjustments to the fender liner to push them in more toward the front and also BMC. Sounds like a lot of work but the shop doing it does them a lot and I had my car back the same day. Looks very clean.
I do not notice a big difference in handling with the 0 offset but I was running the stock Heritage wheels with 25mm spider trax spacers prior. Maybe if I went from full stock to 0 offset I’d feel the difference.

View attachment 3144736

View attachment 3144737
Looks so clean! What sliders you running?
 

Users who are viewing this thread

Back
Top Bottom