Vintageteqparts ToyotaMatt link round up (8 Viewers)

[JackWagon]

I ordered a set of Kustom Koito LED front side marker lamps on July 28, 2025 from VintageTeq and have yet to receive the parts or any correspondence about the order. I've sent numerous messages here and through their website to no avail. I wish they would refund my money so I can get them somewhere else.

 

[JackWagon]

I ordered a set of Kustom Koito LED front side marker lamps on July 28, 2025 from VintageTeq and have yet to receive the parts or any correspondence about the order. I've sent numerous messages here and through their website to no avail. I wish they would refund my money so I can get them somewhere else.

Well, that sucks. I didn't realize he wasn't on here anymore... Guess the money is gone

 

[Unimogguy]

Well, that sucks. I didn't realize he wasn't on here anymore... Guess the money is gone

@JackWagon Contact your credit card company immediately!

 

[tex45]

I ordered a set of Kustom Koito LED front side marker lamps on July 28, 2025 from VintageTeq and have yet to receive the parts or any correspondence about the order. I've sent numerous messages here and through their website to no avail. I wish they would refund my money so I can get them somewhere else.

Not sure if you ordered front or rear but both are available from cruiserteq/city racer. Pretty sure these are the bulbs:

67 LED Light Bulb - (12) SMD LED Tower - BA15S Base

The BA15S plug-and-play LED replacement bulb is suitable for vehicle applications. The 360° beam angle reduces hot spots and provides a wide viewing angle for all-over light emission. The stock bulb cover encloses the LEDs and gives the bulb a traditional look. Designed to last 10,000 hours- 8...

www.superbrightleds.com

 

[CruiserTrash]

Not sure if you ordered front or rear but both are available from cruiserteq/city racer. Pretty sure these are the bulbs:

67 LED Light Bulb - (12) SMD LED Tower - BA15S Base

The BA15S plug-and-play LED replacement bulb is suitable for vehicle applications. The 360° beam angle reduces hot spots and provides a wide viewing angle for all-over light emission. The stock bulb cover encloses the LEDs and gives the bulb a traditional look. Designed to last 10,000 hours- 8...

www.superbrightleds.com

Not sure about 40s or pigs, but 60 Series trucks use 194-base bulbs for the side markers and not BA15-base. Just adding clarity so people don't order stuff they can't use.

@JackWagon

 

[Unimogguy]

Not sure about 40s or pigs, but 60 Series trucks use 194-base bulbs for the side markers and not BA15-base. Just adding clarity so people don't order stuff they can't use.

@JackWagon

Also…be sure to get the Amber or Red not the white for your brake light or turn signal replacement bulbs. I contacted SBL several years ago to get clarification on this topic and this is there response:

Hello, I was told by someone that it’s best to have a red led bulb behind a red lense cover and an amber led behind an amber lense cover. This is for an automotive application. I can’t remember the reasoning or know if that’s correct? Is it because the lense doesn’t filter out the red/amber spectrum and makes a more saturated color? If you’ve written a topic on it feel free to link it and I’ll read up. I looked through the 12 pages of topics and didn’t see it. Thank you in advance, Chris

​

Good Afternoon Chris Yes that is correct. The reason is beacuse the colors shine and look better behind there same color lens. Think of it like this. If you put a white LED behind a red lens. You will get a pink color. So this is way we say putting red behind a red lens is a good look. Thank you, Chris H Super Bright LEDs Inc 866-590-3533 sbl-support@superbrightleds.com http://www.superbrightleds.com

[/td]​

 

[JackWagon]

Update. I talked to cruiser Matt. He explained why the order was taking so long and offered to send me a similar, albeit more expensive, set of markers at no extra charge. The guy was really nice and very straightforward about everything. It's not everyday the owner of a company reaches out to a customer to apologize for the delay and make things right.

 

[jesus888]

Update. I talked to cruiser Matt. He explained why the order was taking so long and offered to send me a similar, albeit more expensive, set of markers at no extra charge. The guy was really nice and very straightforward about everything. It's not everyday the owner of a company reaches out to a customer to apologize for the delay and make things right.

*ToyotaMatt not @cruisermatt

 

[RevISK]

*ToyotaMatt not @cruisermatt

Big diff.

 

[Ozarks4WD]

Ehh, i placed my order (ORDER #6857) with VintageTeqParts.com Home Page – VintageTEqParts.com - http://vintageteqparts.com/ on July 9th for EM TOYOTA Coolant Overflow Bottle Reservoir Jug Over Flow Hose w/ Pickup-Tube 9/77 - FJ60.
Never received the item, no response to emails...hands down. I understand supply issues and etc, but at least communicate with your customers...

Update, after this post, I have received tracking number from the vendor. Fingers crossed.

 

[OGBeno]

Ehh, i placed my order (ORDER #6857) with VintageTeqParts.com Home Page – VintageTEqParts.com - http://vintageteqparts.com/ on July 9th for EM TOYOTA Coolant Overflow Bottle Reservoir Jug Over Flow Hose w/ Pickup-Tube 9/77 - FJ60.
Never received the item, no response to emails...hands down. I understand supply issues and etc, but at least communicate with your customers...

You could have gotten this in 1 day from your local Toyota dealer. Still readily available.

 

[saltycoconuts]

You could have gotten this in 1 day from your local Toyota dealer. Still readily available.

BuT iTs NoT sNoW vErSiOn

 

[Ozarks4WD]

You could have gotten this in 1 day from your local Toyota dealer. Still readily available.

Got you, but I live in the rural area. "Local" is over two hours for me (yes, I get it, two hours vs 3 months, i got the point). That's why I ordered online...especially because it wasn't "emergency", just another thing to take care on the list...