I can’t wait to see how the hinge works.
Fairlead License Plate Flip - Victory 4x4
Offering quality steel and aluminum goods for Toyota and Lexus 4x4s.www.victory4x4.com
ARCHIVE Victory4x4 prototyping part 2 (7 Viewers)
- Thread starter brimy311
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
@brimy311
I shot you a PM, but wanted to draw your attention to some quality concerns with Victory products over on the 100 series board.
forum.ih8mud.com
I acknowledge the small sample size. But, as someone with a current bumper order, I'm concerned & hoping you guys can add some context.
I shot you a PM, but wanted to draw your attention to some quality concerns with Victory products over on the 100 series board.
Victory bumper install write up with pics - disappointed
After 3-1/2 months finally got my front victory bumper. When I first saw this last year, I liked the look and specs, such as 3/16" steel plate with 3/4" tabs for tow shackles. I still like the look and the power coat seems good, but that's about all. Needless to say, i didn't get what I...
forum.ih8mud.com
I acknowledge the small sample size. But, as someone with a current bumper order, I'm concerned & hoping you guys can add some context.
Oh man I don’t like that. Might have to stick with Ironman for $1200...@brimy311
I shot you a PM, but wanted to draw your attention to some quality concerns with Victory products over on the 100 series board.
Victory bumper install write up with pics - disappointed
After 3-1/2 months finally got my front victory bumper. When I first saw this last year, I liked the look and specs, such as 3/16" steel plate with 3/4" tabs for tow shackles. I still like the look and the power coat seems good, but that's about all. Needless to say, i didn't get what I...
I acknowledge the small sample size. But, as someone with a current bumper order, I'm concerned & hoping you guys can add some context.
- Thread starter
- #206
We ship nearly 2000 orders a month, we do have issues like this pop up from time to time. However, we’ve been doing this for 17 years, we are far from shady s*** peddlers and our customer service is not bad. I’m sure there is more information between CS and this customer that I’m not aware of.@brimy311
I shot you a PM, but wanted to draw your attention to some quality concerns with Victory products over on the 100 series board.
Victory bumper install write up with pics - disappointed
After 3-1/2 months finally got my front victory bumper. When I first saw this last year, I liked the look and specs, such as 3/16" steel plate with 3/4" tabs for tow shackles. I still like the look and the power coat seems good, but that's about all. Needless to say, i didn't get what I...
I acknowledge the small sample size. But, as someone with a current bumper order, I'm concerned & hoping you guys can add some context.
Daryl will be responding from our Victory4x4 account this morning.
- Thread starter
- #208
Here’s the tailgate table product released!
www.victory4x4.com
GX Tailgate Table | 470 & 460 (03-23) - Victory 4x4
Offering quality steel and aluminum goods for Toyota and Lexus 4x4s.
www.victory4x4.com
looks awesome! does it only attach to the plastic shell or does it have anchors on the metal inside the door?Here’s the tailgate table product released!
GX Tailgate Table | 470 & 460 (03-23) - Victory 4x4
Offering quality steel and aluminum goods for Toyota and Lexus 4x4s.
Thanks!
- Thread starter
- #210
Cheaper than OrangeBoxx.
Yeah I guess it is. I just know for an FJ I can get a stainless steel tailgate table shipped from Australia for $325, so it kind of hit me as a strong number. Others may disagree.
It is a tad high, I paid $180 for my Kaon table and another $90 to have it shipped from Australia. That said, it's a very simple design and lacks some of the features that the Victory and OrangeBoxx tables offer, if that matters to you. Lastly, it's made in the USA so there's that to consider.
Yep, just depends what you want. To me for a potential food prep table I would rather have stainless steel, though that is not a big deal... and as I have mentioned before I don't care about molle, not interested in strapping a bunch of stuff to my tailgate.
I was considering the koan for a while but I didn't really like the fact that it's only getting attached to the plastic cover. I'm thinking what if I want to make a 25lb turkey out in the woods and need somewhere to prep it
lol.......
Would you consider a 3-4" lip that can be bolted to the outside using the 3 table bolts to extend the surface? It should fit under the rear window when folded up
I was considering the koan for a while but I didn't really like the fact that it's only getting attached to the plastic cover. I'm thinking what if I want to make a 25lb turkey out in the woods and need somewhere to prep it
I bolted mine through the panel and used over sized fender washers to further distribute the load. I wouldn't mount it with the self-tapping screws that were provided. I've had over 20lbs on mine (precision rifle) for hours with no issues, that's a pretty hefty load compared to what most would use it for. If I am willing to trust $11K+ to sit on there for hours unattended then it should be fine for the majority of users.
Heh, I just looked at the Kaon SS table and little cubby storage cage for the GX 460... these days with shipping and exchange it comes out right under $400. Go figure.
The body gap on that 100 series would leave me pretty disappointed (and makes me think it was installed incorrectly) but the rest is silly. Hardware was a mixup that can be fixed in 10 minutes at Lowes.
Complaining about lack of welds or GR8 hardware just shows the posters ignorance. A 1" weld of 6010 is going to exceed the breaking strength of a 3/8" GR8 bolt. Things do not need to be full pen welded on all sides to achieve structural strength that meets the material itself (reality is far less than that).
Complaining about lack of welds or GR8 hardware just shows the posters ignorance. A 1" weld of 6010 is going to exceed the breaking strength of a 3/8" GR8 bolt. Things do not need to be full pen welded on all sides to achieve structural strength that meets the material itself (reality is far less than that).
Similar threads
