selling a project vehicle..........
76 fj40
right now it's a rolling frame with the body on it, powertrain installed. still need lots and lots of work but all the heavy mechanical work has been completed and 90% or more of the parts are there and in new or very good used condition.
frame was stripped, cleaned up and powder coated
both axles completely rebuilt
ARB air lockers front and rear
front knuckles completely rebuilt
1990 chevy 350 TBI gone thru
new NV4500
all new AA adapter and clutch/flywheel
rebuilt transfer case
saginaw ps
SOA
extremely clean tub, already primered and interrior rhino-lined, i have never seen a cleaner un-restored tub than this one. the rear sill is in prefect shape. no rust anywhere. fenders not cut. a few very small ripples in the cargo area. as close to prestine as you're going to find.
nice pair of oem fenders
oem windshield in good shape but glass cracked
one-piece aftermarket tailgate panel
no doors or top
oem roll-bar
oem seats and brackets
tires on it are junk roll-arounds
boxes and boxes of parts, i'd say maybe 15 boxes worth?!
very, very complete build documentation
everything that has been installed has either been restored, rebuilt or replaced with new parts.
there's more than $11k in parts alone, that does not include the cruiser itself or any labor.
asking price is $8k
vehicle is located at my shop in stockton CA. does not run or drive.
76 fj40
right now it's a rolling frame with the body on it, powertrain installed. still need lots and lots of work but all the heavy mechanical work has been completed and 90% or more of the parts are there and in new or very good used condition.
frame was stripped, cleaned up and powder coated
both axles completely rebuilt
ARB air lockers front and rear
front knuckles completely rebuilt
1990 chevy 350 TBI gone thru
new NV4500
all new AA adapter and clutch/flywheel
rebuilt transfer case
saginaw ps
SOA
extremely clean tub, already primered and interrior rhino-lined, i have never seen a cleaner un-restored tub than this one. the rear sill is in prefect shape. no rust anywhere. fenders not cut. a few very small ripples in the cargo area. as close to prestine as you're going to find.
nice pair of oem fenders
oem windshield in good shape but glass cracked
one-piece aftermarket tailgate panel
no doors or top
oem roll-bar
oem seats and brackets
tires on it are junk roll-arounds
boxes and boxes of parts, i'd say maybe 15 boxes worth?!
very, very complete build documentation
everything that has been installed has either been restored, rebuilt or replaced with new parts.
there's more than $11k in parts alone, that does not include the cruiser itself or any labor.
asking price is $8k
vehicle is located at my shop in stockton CA. does not run or drive.
