- Location
- United States
SOLD - Turbo setup
SOLD - pump, injectors, glow plugs
UPDATE - Will include all other parts still available including the spare CT26 turbo along with block & crank for the full asking price, $1300 + shipping
For Sale - CT26 Turbo - $350
I have it all crated up ready to go.
**********************************************************************
Quick back story, I was in the process of re-building my 1HZ, stripped down and parts at the machine shop, machine shop notified me that they found some hairline cracks in the head(more info below) at that point I decided to scrap the re-build and go the engine swap route, therefore I have all the parts for sale as follows:
Block and crank - $1300
A reputable machine shop in San Diego(can show receipts) magna fluxed everything, inspected, and machined to perfect condition. The crank mains were ground .25 O/S and cylinders bored .25 O/S. $700 in machine shop costs.
Head - make offer
After magna flux hairline cracks were found in the precumbustion chambers between the injector and glow plug hole, see pictures. I consulted a few and most felt it was not a big deal, but cracks in the head are not good. Nothing wrong with camshaft.
Injection Pump, injectors, glow plugs:
For Sale - 1HZ Injection Pump, Injectors, Glow Plugs
CT26 turbo, manifold, and crossover pipe - $500
Aluminum accessory covers, cleaned and ready to go - $150
Timing belt parts,water pump - $100
Oil Pan w/pickup - $100
All the other misc parts/brackets, etc - make offer.
I will make a deal for the whole lot or for the bulk of the parts. Will crate up and ship as needed.
Nick
SOLD - pump, injectors, glow plugs
UPDATE - Will include all other parts still available including the spare CT26 turbo along with block & crank for the full asking price, $1300 + shipping
For Sale - CT26 Turbo - $350
I have it all crated up ready to go.
**********************************************************************
Quick back story, I was in the process of re-building my 1HZ, stripped down and parts at the machine shop, machine shop notified me that they found some hairline cracks in the head(more info below) at that point I decided to scrap the re-build and go the engine swap route, therefore I have all the parts for sale as follows:
Block and crank - $1300
A reputable machine shop in San Diego(can show receipts) magna fluxed everything, inspected, and machined to perfect condition. The crank mains were ground .25 O/S and cylinders bored .25 O/S. $700 in machine shop costs.
Head - make offer
After magna flux hairline cracks were found in the precumbustion chambers between the injector and glow plug hole, see pictures. I consulted a few and most felt it was not a big deal, but cracks in the head are not good. Nothing wrong with camshaft.
Aluminum accessory covers, cleaned and ready to go - $150
Timing belt parts,water pump - $100
Oil Pan w/pickup - $100
All the other misc parts/brackets, etc - make offer.
I will make a deal for the whole lot or for the bulk of the parts. Will crate up and ship as needed.
Nick
Last edited:
