U Joint for Steering column (1 Viewer)

[Coastline]

I'm doing a 1.5 inch body lift on a 77 fj40 and need a u-joint for for the steering column. Any suggestions? Thanks, guys.

The lift parts I'm using are UHMW under the body and 1.5" X 2.0" tubing under the bib and back end along with with Energy Suspension mounts and polypropylene webbing

 

[pbgbottle]

is it stock steering .if so you can lower the mounting plate for the steering column in the firewall a bit .
and space the steering box up a using a spacer and longer bolts .eliminating needing to try and shove a u-joint in there.


that is if it is a stock steering setup

 

[Coastline]

Good idea pbgbottle. Sounds like a lot less work that way. The steering is converted to power and the box is from a late 80's Toyo pickup. I'll take a look at it this weekend.

 

[flaa1a]

I am pretty sure I read somewhere in the 55 section that the steering column U joint is the same as a like a 70 s corolla drive shaft u joint.....

Here it is....Not even sure if this is what you need, but I tried.

https://forum.ih8mud.com/60-series-wagons/82386-jinkies-fj60-steering-column-u-joint-info.html


Randy

 

[77TLCFJ40]

I have a couple of steering shafts with nice U-Joints from early 4Runners or pickups. I'll try to get some pics up later.