turbo'd intercooled BJ 70's anyone?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 19, 2008
Threads
1
Messages
10
Hey guys, new to your site. I have some shots of 2 differrent BJ 70's that we added a turbo and intercooler. We've done it two ways. The top mount (cutting holes in BJ hoods is always a rush!) and front mount. Someone tell me how to post up photos and I'll get er done!
 
pics are easy,

hit "go advanced"," manage attachments"," browse"," upload"...

you may have to resize the pics but it's fairly self explanatory once you start. :cool:
 
here goes nothin

jeepshopphotos001-1.jpg
 
What is the electric pump for on top of the rad - the one pictured ion the top mount intercooler pic?
 
Canadian bJ70 85-86, with factory A/C systems, the pump is a snowperformance methanol/injection .Both cruisers have now front mount intercoolers, from a 740 volvo; one with extra juice, methanol injection.
 
OK, so you installed the a/c from a 7X series into the CDN 70?

Have you dyno'd the 3b after the mods? Does the meth injection make a difference?
 
Yes, A/c from a 70 series, the methanol/injection gave a extra performance, specially going in a long hill with the A/c on. No dyno, sorry.I found that using 40% methanol(99) and 60 % water gives a perfect combination for air mixture. You can actually calibrate the pump timing so it can have max flow at lower PSI( very helpfull for offroading) to keep egts low.
 
Sounds cool, I have been thinking about meth injection for a while now, might give it a go on my truck , done just about everything else:)

Nice work!
 
I have used for 65000 km, with 0 issues, just happy faces, even with the pump under water(river crossing) great performance..
 
The seal material is actually a Jeep;p door seal. Just hit your local salvage yard and pull any bit of good weatherstripping from a SUV hatchback and you're in! I'll post more photos tomorrow. The ones above are all that I had left in my camera when the customer came to get the front mounted one! I have install shots at the shop on the laptop. Spallet's is the one with the top set up. He urged me to get these posted, sorry for the delay, they are worth the wait. -atomic
 
fo toes!

OOOO I found some other shots. This is the Turboglide kit. I'm sure it's Spallet's BJ too! Enjoy!
newshop004.jpg
 

Users who are viewing this thread

Back
Top Bottom