Tuffy Center Console width? (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 11, 2005
Threads
27
Messages
110
Location
Gig Harbor, WA
Help Guys,

Which model fits the 78 FJ40? I see there is a 6 1/2" model, an 8" model, and looks like a model that has 8" stereo compartment AND a 6 1/2 main compartment. I want the stereo model, so is it the 8" model, or the "dual width" model.

Thanks...
 
6-ish" with stereo is what I got, no way an 8" would fit.
24799412.jpg
 
PImps thats the green one isnt it :frown: I want that 40
 
why yes it is.......and no you cant :D
111024886.jpg




kling-on said:
PImps thats the green one isnt it :frown: I want that 40
 
rover...


I have the "dual width" model...works great.


Good luck!


-Steve
 
6 1/2 in mine, no way a wider one would fit between my buckets.
 
When I remove the old, stock, console or install the Tuffy console is it necessary to break the rear heater coolent lines apart?
 
Doug_S said:
When I remove the old, stock, console or install the Tuffy console is it necessary to break the rear heater coolent lines apart?


Yes - if you go w/ the CCOT mount. You could cut a slot in it if you wish, but when was the last time you replaced those hoses???
 
I am running the 6.5 inch with aftermarket bucket seats and I have less than .5 inches of clearance between the seats and the console
 
I'm going with the Tuffy console that SOR sells. They also have a mount that fits to the stock seats. When removing the stock console, do I have to break the coolent lines?

Thanks in advance,
 

Users who are viewing this thread

Back
Top Bottom