ok im running the truxx 3 inch spacer in frt and 1.25 in rear, with the body mount chop it easily clears my new BFG 35x12.50 x 17 in stock rims..my problem it sits low....could I run soft duty OME stuff front & rear with my spacrs sill in? what issues would i have?
Truxx lift and 35 bfg muds ant more lift
- Thread starter axlesnap
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Have you driven it off road, I got to imagine your going to have rubbing issues in the back when you flex.
I wouldn't go more then the 3" in the front, it will put to much stress on your cv causing failure.
For the money of a truxx lift your could of bought a Toytec lift or an OME lift with springs instead of spacers
I went with the Toytec lift 3" in front and 2.5" in the back, it actually lifted it 3.5 in the front and 3" in the back.
I'm running 34/12.2/17 tires and I think it looks good and I've seen people running the OME lift with 35" tires and that looks perfect.
I think a new lift or a 6" lift might be your only option(I'm sure you don't want to down size your tires)
It would be nice if they came out with a small body lift like a 1" or a 1.5"
Post some pics of yours, I like to see what it looks like
Here is mine I plan on running 35's in the spring
I wouldn't go more then the 3" in the front, it will put to much stress on your cv causing failure.
For the money of a truxx lift your could of bought a Toytec lift or an OME lift with springs instead of spacers
I went with the Toytec lift 3" in front and 2.5" in the back, it actually lifted it 3.5 in the front and 3" in the back.
I'm running 34/12.2/17 tires and I think it looks good and I've seen people running the OME lift with 35" tires and that looks perfect.
I think a new lift or a 6" lift might be your only option(I'm sure you don't want to down size your tires)
It would be nice if they came out with a small body lift like a 1" or a 1.5"
Post some pics of yours, I like to see what it looks like
Here is mine I plan on running 35's in the spring
- Thread starter
- #3
here it is....its nosediving...I only got the truxx lift cuz it was $200.00 and I did not plan on 35's but my eyes were bigger then my stomach...so the rear seems 0k, but maybe I should run a HD OME in front..(going to add a bumper)...... What about a AP off road coil over front? my only concern is a coil over is only bling..they dont add articulation sure they are adj..blah blah..am i missing somthing?
Wow that back is high for only 1.25" lift. Has everything settled in yet?
It doesn't look like it is sitting low, if it works I'd leave it alone
I'm sure you like everyone else has a list of other mods you want to do, I'd focus on them for now.
Just my 2 cents
It doesn't look like it is sitting low, if it works I'd leave it alone
I'm sure you like everyone else has a list of other mods you want to do, I'd focus on them for now.
Just my 2 cents
haha.. hey stinky, my front skid plate looks crinkley too. However I have a dent in the middle of mine from rolling over a boulder. The skid held it though, even though it was dented. That POS aluminum skid is better than I thought. You need to talk to KevinNY on here.... he's in your area bro.
