SOLD Truckee CA: HDJ80 H150 transmission nearly new

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 12, 2003
Threads
165
Messages
1,350
Location
Truckee, CA
Vehicle Model
  1. 80 Series
Location
Truckee, California 96161 United States
I have a H150 transmission that has less than 5000 miles on it. Shifted butter smooth. It’s basically new.
Input shaft for 1HDT, 1HZ, 1FZ is easily swapped over.
Can deliver to Valley Hybrids or Bay Area.
Asking $2800 obo.
IMG_2681.webp
 
Which bell housing is on it and which input shaft currently? What did it come out of?
 
Appears to have V8 bellhousing from photo and gifu states you have to swap input for use with hdt etc.
 
Appears to have V8 bellhousing from photo and gifu states you have to swap input for use with hdt etc.
Looking again I see it’s listed for an 80 series. I’m not familiar enough with the various bell housings to identify it but if it’s from an 80 it wouldn’t be a v8. I see that he’s mentioned an input shaft swap but I’m wondering what’s currently installed.
 
That is an h150 that came behind a VDJ something as identified by the huge bellhousing. It will have a 14 foot long input shaft.

Ok, maybe it’s not that long but it makes a great paper towel holder.

1HD on left, 1VD on right.

1723329805123.webp
 
Will this drop in behind a 1FZ?
Yes.
this is what would come behind a 1FZ.
Things you would need:
1FZ input gear swapped in (valley hybrids could do this before shipping), bell housing, flywheel, clutch, clutch pedal.
 

Users who are viewing this thread

Back
Top Bottom