Troll

[cats48]

Need help installing a weber carb. Bought it from Alan yesterday. No instructiions. I installed one 5 years ago but had instructions. Need to know how to connect the fuel line and the return line. Picture would be great. Thanks Coach

 

[Trollhole]

Need help installing a weber carb. Bought it from Alan yesterday. No instructiions. I installed one 5 years ago but had instructions. Need to know how to connect the fuel line and the return line. Picture would be great. Thanks Coach

No return line. Just cap it. As far as feed line I'd cut the fuel line at the carb and add a short section of rubber fuel line.

Here is how mine was done. Also the pcv line should go to the base of the carb and the connection under the air cleaner should be connected to the valve cover vent.

 

[cats48]

Thanks

That's what I needed. Your the man.

 

[cats48]

PCV

Not clear on the PCV location at the base of the carb.

 

[Trollhole]

First pic. You see where the fuel line and the pcv hose cross just before the carb? Right below that intersection on the pic is a small plug that is on the adapter. That is where the pcv hose should be. Or it can go to a vacuum source somewhere near the base of the carb. Did you get the adapter base with the carb?

 

[cats48]

Adapter

Yes this is Alans Hardins Weber.

 

[cats48]

PCV

Found it its plugged.

 

[Trollhole]

Does it have a plug on the side?

 

[cats48]

Plug

There is no receptive plug. Its been plugged closed.

 

[Trollhole]

I think it's a 1/8 NPT. You need a nipple that goes to something like 3/8.

I might have one if you cannot find one.

 

[cats48]

Think

Advance has one?

 

[Trollhole]

Dunno it's a wierd size.

 

[cats48]

Thanks

for your help Marshall. See if you can find that nipple and I'll buy it if I can't find one. Thanks again Rick

 

[Trollhole]

Okay call me tonight and I'll look for it.

414-0563