SOLD TRD 8" e-locker, ready for regear

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

KLF

Frame waxer
SILVER Star
Joined
Apr 5, 2003
Threads
246
Messages
10,207
Location
Southern NH
SOLD SOLD SOLD

I have a TRD rear electric locker, not sure if it's from a Tacoma or 4Runner, can't remember the age either. I bought it as a spare years ago in case anything ever went wrong with the one I had in the back of my mini, but never needed it. The front pinion bearing was bad when I bought it, but didn't matter to me as I was gonna re-gear anyway. I took it all apart, everything else is fine, carrier bearings, etc. I did totally rebuild the actuator, all new O-rings, stainless hardware, tested, works great. As you can see, it's still apart, so if you need to regear this is a perfect candidate. Or, you could just put it back together with the 4.10's and run it.

Asking $350. I'd prefer to not ship, but will at your expense. PM if interested.

IMG_20180331_161259.jpg

IMG_20180328_194034.jpg

IMG_20180331_161000.jpg

IMG_20180331_161053.jpg
 
Last edited:

Users who are viewing this thread

Back
Top Bottom