semlin
curmudgeon
there is no ideal trail tool/repair kit, but as I struggle to keep it in two tool boxes and three rubber maids, here is mine. I'm looking for suggestions on what I'm missing or what I don't need.
wrenches
8, 10, 12, 14, 17 and 19mm open ended wrenches in stubby and regular (12 pces)
10/12/14/17mm box wrenches
monkey wrench that opens to 32mm
robogrip or similar open mouth wrench that opens to 32 mm
pliers
large/small/open mouth (pipe) vice grips
regular pliers
needlenose
cutters
snap ring
sockets
8, 10, 12 mm 1/4 inch drive sockets short and deep ( 6 pces)
10, 12, 14, 17, 19mm 3/8" inch drive sockets short and deep (10 pces)
14, 17, 19mmm ½"m drive short and deep (6 pces)
21mm deep ½" socket (1 pce)
54mm hub socket (1 pce)
½" 18-24" breaker bar
1/4, 3/8 and ½ ratchets and a 3/8" wobble ratchet
3" and 6" 1/4 and 3/8" extensions
6" ½" extension
½" torque wrench
½" to 3/8" socket adaptor
screwdrivers
4 flatheads in various sizes up to the big 18" model
3 phillips up to the 12" model
1 variable bit driver with a bit set and a long nose
metric allen key set
Heavy Crap
brass mallet
brass drift
claw framing hammer
impact driver and bits
Esoteric
easy outs
hacksaw w/ extra blades
magnet retrieval tool
tie rod end puller
pickle fork
propane torch attachment & sparker
Electrical
cordless drill w/extra battery
maglight w/extra batteries
cobalt drill bit set up to ½"
multimeter
stripper/crimper tool
replacement fuses
10/12/14 gauge wire
10/12/14/16 butt connectors
12/14 spade connectors
dieletric grease
general materials
gasket paper
white lithium grease
shop towels and rags
4 litres engine oil
4 litres premixed coolant/h20
brake fluid
1 litre gear oil
tube of axle grease
1 litre ATF
cutting fluid
penetrating oil/wd40
small propane bottle
blue silicone RTV
bailing wire
duct tape
Parts
birfield
one birf kit from inner axle out
plugs/plug lead set/rotor/cap
one set wheel bearings
a few random nuts and bolts
and.. the FSM
wrenches
8, 10, 12, 14, 17 and 19mm open ended wrenches in stubby and regular (12 pces)
10/12/14/17mm box wrenches
monkey wrench that opens to 32mm
robogrip or similar open mouth wrench that opens to 32 mm
pliers
large/small/open mouth (pipe) vice grips
regular pliers
needlenose
cutters
snap ring
sockets
8, 10, 12 mm 1/4 inch drive sockets short and deep ( 6 pces)
10, 12, 14, 17, 19mm 3/8" inch drive sockets short and deep (10 pces)
14, 17, 19mmm ½"m drive short and deep (6 pces)
21mm deep ½" socket (1 pce)
54mm hub socket (1 pce)
½" 18-24" breaker bar
1/4, 3/8 and ½ ratchets and a 3/8" wobble ratchet
3" and 6" 1/4 and 3/8" extensions
6" ½" extension
½" torque wrench
½" to 3/8" socket adaptor
screwdrivers
4 flatheads in various sizes up to the big 18" model
3 phillips up to the 12" model
1 variable bit driver with a bit set and a long nose
metric allen key set
Heavy Crap
brass mallet
brass drift
claw framing hammer
impact driver and bits
Esoteric
easy outs
hacksaw w/ extra blades
magnet retrieval tool
tie rod end puller
pickle fork
propane torch attachment & sparker
Electrical
cordless drill w/extra battery
maglight w/extra batteries
cobalt drill bit set up to ½"
multimeter
stripper/crimper tool
replacement fuses
10/12/14 gauge wire
10/12/14/16 butt connectors
12/14 spade connectors
dieletric grease
general materials
gasket paper
white lithium grease
shop towels and rags
4 litres engine oil
4 litres premixed coolant/h20
brake fluid
1 litre gear oil
tube of axle grease
1 litre ATF
cutting fluid
penetrating oil/wd40
small propane bottle
blue silicone RTV
bailing wire
duct tape
Parts
birfield
one birf kit from inner axle out
plugs/plug lead set/rotor/cap
one set wheel bearings
a few random nuts and bolts
and.. the FSM