sandcruiser
....back in the saddle again....
I opted to jump the blue wire and a black/white (ground).
It seems to be working.
I used an inch or so of welding wire, added some heatshrink, then inserted the wire on the harness side of the white connector. I used needle nose pliers to really jam it in there.
I taped it up again, that may help.
Lets hope it holds....
But it works today.
It seems to be working.
I used an inch or so of welding wire, added some heatshrink, then inserted the wire on the harness side of the white connector. I used needle nose pliers to really jam it in there.
I taped it up again, that may help.
Lets hope it holds....
But it works today.