todd's stinking blue pile (1 Viewer)

[gnob]

set up the rear e-locker for the pile. the elocker is kind of a bitch to wrastle with. i REALLY, REALLY need to make a diff jig. and some way to attach it solidly. i spend a bunch of time pulling the 60 lb sawhorse around the garage with the diff in the vise.

this diff is yukon v6 gears, .105 pinion shim (about 19 in-lb preload with a solid collar and .068 shim) set at .007 backlash. 120 ft-lb (pulled on torque wrench) carrier bearing preload. final pinion nut is red loctite, 120 ft-lb and staked.

 

[mobydick]

Aric, what's the yellow stuff? Special gear lube or mustard from your lunch?

 

[jamister1]

Curb paint, he customizes the curbs in front of his house so nobody can park there...EVER!

 

[mobydick]

Maybe something with color to help you see how your gears are meshing???

Just a guess now....

 

[gnob]

yep, just run of the mill gear marking compound, cut with wd-40.
mixed in the bottom of upside down pepsi can.

 

[RichardSkinner]

Necropost, but tuning in and catching up. Definitely taking notes for my current swap and very much appreciate it.