- Thread starter
- #1,021
I flipped both front and rear and am at around 98-99"
I had planned on doing my rears too but the center pin was actually in the
center of the leafs. BDS 4" lift springs.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I flipped both front and rear and am at around 98-99"
Since the wife is up visiting her parents today I took the my doors into the living room to disassemble them for rust repair.
Getting ready to start my spring over, shackle reversal and cut n turn for this weekend, anyone in the area bored and want to help, let me know
What?! We didn't talk you into linking it? Take plenty of pics!
Picked up a set of 265/75/16 Cooper (go figure) Discover M/S tires today for the FJC. Near new take-offs for $325. Now I need to hunt up another set of wheels for cheap. Does anyone know if FJ80 wheels fit the FJ Cruiser?
do you know the width and backspacing off the top of your head?
Ah yes, the 80s have as width of 8", offset of 0"and backspacing if 4.5".
The major hassle with fitting wheels to the FJC is the brake caliper. It is huge and overhangs the hub flange so that a wheel with a flat center section will always interfere with the caliper. 1" spacers are necessary in most cases. I run 16x8 4runner wheels with 1" spacers. The only 16 wheel which fit with no spacers is TRD's.