Looks great! Where did you get that snorkel top?
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Thanks and check outs Snorkelupgrade.com for the prefilter
It was back in stock on slee’s website recently. I had set up their alert system for it when I first started looking for bumpers. By the time it came back in stock I had already purchased a dissent bumper.
Does anyone know the bulb types for the T17 market lights? I need new ones, but the item code is unreadable.
I purchased in July and delivered in December. I took it to the body shop to have it pained body color but haven’t had a chance to install as I am in Mexico until May. Seems pretty hefty but my understanding it will weigh around 68 lbs after the factory bumper is removed. I still have the AHC and want to limit the impact to that system and this looked like a good compromise.
I think you’ll find that is true, especially if you don’t add a winch. Even with the winch (and synth cable) my AHC handled the load pretty well.
Great. Thanks for the confirmation and reassurance.
The amber bulb is a 1156 in amber. The smaller bulb is a 89. If wanting to use LED bulbs, they both use a BA15s base.
Ok, This might be a stupid question, but here goes. I have searched everywhere and I cant find what the hole is in the top of this bumper is used for. I thought it might have been for a winch control box, but its too small. Can anyone here tell me please! LOL
For me the hole in the top is a good way for me to look and see how my winch line is spooling. I also use it to reach down and access the winch controls.
hoser
SILVER Star
I just installed the TJM T17 yesterday on my 2006 LX and I have a wiring question. I connected the LED's that come with the T17 to the existing wiring harness for the factory bumper. Since the LX turn signals are in the bumper, there is a wire/ground for the fogs and a wire/ground for the indicators. After installing I now have the hyperflash issue for my turn indicators. Did I wire this wrong or do I just need an LED flasher? Thanks
You just need an LED flasher.
Needs a add on part? Can you link?
Led blinker relay
With the TJM bumper it has led blinkers and now they blink furiously. Bought a led flasher relay on line and the said direct fit but it is only a three pronge and the one under the dash had quite a few more. Am I looking at the wrong relay or is there a certain kind I can find to fit factory plug.
forum.ih8mud.com
Thanks for the help - I have replaced the flasher and it is now blinking at a relatively normal speed. For what it's worth, the flasher on my 06 LX was green, not black. I looked right at it for several minutes and didn't realize I was looking at the flasher.
My T17 bumper comes in today, can't wait. Although the LC doesn't have turn signals, so do I tap in from the other headlight area turn signals?
Last edited:
That's what I did on mine.
BTW, my T17 is for sale, someone can save a few hundred over new.
Argggg. I would have taken it off your hands. At least mine comes in today.
