Three Groove Harmonic Balancer/Crank Pulley Needed (FJ60/62/80)

[roadstr6]

The harmonic balancer on the Turdle decided to part ways with the outer two-groove section of the pulley. All six rivets sheared off clean. I am in need of a good three groove HB/pulley. I thought I could use a spare I have here in the shop but as it turns out, it is a 2 groove so no go. I believe the 3FE pulley will work on a 60 series truck. The pulley diameter for the 3FE is smaller so a belt change will take care of that. If anybody has a good 3 groove HB/pulley they'd be willing to let go of, let me know.

Thanks,

Dave

 

[David70FJ40]

I realize I have given you some of this info yesterday but.....

Arrived today and looks good. I purchased it through Auto Zone online and received a $34 gift card for each $100 I spent. And Auto Zone was $81 less then other sites I found. Check out Pioneer.com.

 

[David70FJ40]

Sorry, forgot the photo.

 

[roadstr6]

David,

Autozone wants $445 for the one I need. I guess looking on the bright side that is $136 worth of gift cards.

 

[David70FJ40]

I understand. I bought a used HB from IPOR and it is bent and shakes the whole truck. I wish I had bought this one first and not the used, junk part, I would have been driving now and not having to go through tearing down the front of the 40 again. Unless I have no other alternative, I will never buy another used, junk part again.

 

[Rice]

Like this one?

3FE Harmonic Balancer/ Crankshaft Pulley

 

[roadstr6]

Buying used parts sight unseen is never a great idea. OTOH if you can put your eyes and hands on a part and feel good about it that is the way to go. I don't put a lot of faith in anything that Autozone sells. That's just me. I've gotten lots of brand new garbage from them.

 

[roadstr6]

Like this one?

3FE Harmonic Balancer/ Crankshaft Pulley

Yeah but the pulley is removable from the HB on the 3FE version. I have a sneaky suspicion that the part you linked to is just the outer pulley and not the whole HB/pulley combo. The picture does not show the HB which is a larger diameter than the pulley and should be visible if the pulley were attached to it.

 

[Rice]

Picture looks like a complete unit but if not sure give Jason @ CruiserYard a PM. I've purchased a few odds and ends from him with no trouble. User name on mud is arcteryx.

 

[roadstr6]

Picture looks like a complete unit but if not sure give Jason @ CruiserYard a PM. I've purchased a few odds and ends from him with no trouble. User name on mud is arcteryx.

Rice, I didn't see the second picture. You're right. It does look like a complete unit. I've PM'd Jason just to make sure. Thanks man!

 

[roadstr6]

Confirmed! The part from Jason is the whole assembly! Rice, I owe you a beer. Thanks for the link!

 

[David70FJ40]

Happy ending!

 

[RedHeadedStepChild]

...Rice, I owe you a beer. Thanks for the link!

Happy ending!

I think a beer should suffice.

 

[roadstr6]

Now that is hilarious!