Rasta,
I like the way you were able to use the lower AC mounting location. Keep it going man!
I like the way you were able to use the lower AC mounting location. Keep it going man!
The Long Overdue RastaRig Buildup
- Thread starter Rastaforte
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #122
Perspectives: 6BT Frame, Bay & Shifter Locale
Ma-A'Preciate Da Love Brotha Don
... Writeen an Workin' make a Labor of Love fa soor....
Da Pics keep coming while da storage be maxin'.... gettin this right may take a few days as I figure things oot.
Some Friend asked for views of engine fit to firewall & such... h'ya go
(notes to Self: Upload here the usual way to Forum s. space/link to bigger pic)
https://picasaweb.google.com/lh/photo/X9aQVRWjmrGz_P7rRplKAdwMppJmMJ0mbTC4KFJLZZU?feat=directlink
https://picasaweb.google.com/lh/photo/geg-uuJbVZUJf4ydN8QtJ9wMppJmMJ0mbTC4KFJLZZU?feat=directlink
https://picasaweb.google.com/lh/photo/WNB3e8PKhKEQdSdqZseDytwMppJmMJ0mbTC4KFJLZZU?feat=directlink
Ma-A'Preciate Da Love Brotha Don
... Writeen an Workin' make a Labor of Love fa soor....
Da Pics keep coming while da storage be maxin'.... gettin this right may take a few days as I figure things oot.
Some Friend asked for views of engine fit to firewall & such... h'ya go
(notes to Self: Upload here the usual way to Forum s. space/link to bigger pic)
https://picasaweb.google.com/lh/photo/X9aQVRWjmrGz_P7rRplKAdwMppJmMJ0mbTC4KFJLZZU?feat=directlink
https://picasaweb.google.com/lh/photo/geg-uuJbVZUJf4ydN8QtJ9wMppJmMJ0mbTC4KFJLZZU?feat=directlink
https://picasaweb.google.com/lh/photo/WNB3e8PKhKEQdSdqZseDytwMppJmMJ0mbTC4KFJLZZU?feat=directlink
Last edited:
- Thread starter
- #123
Perspectives: 6BT Frame, Bay & Shifter Locale
RIGHT side to Firewall Views:
RIGHT side to Firewall Views:
Last edited:
- Thread starter
- #124
Perspectives: 6BT Frame, Bay & Shifter Locale
Left Side Views:
Left Side Views:
- Thread starter
- #125
Perspectives: 6BT Frame, Bay & Shifter Locale
Left Firewall Views:
Left Firewall Views:
- Thread starter
- #126
Perspectives: 6BT Frame, Bay & Shifter Locale
LEFT Firewall cont'd:
LEFT Firewall cont'd:
- Thread starter
- #127
Perspectives: 6BT Frame, Bay & Shifter Locale
This is some views of the undercarriage on RIGHT:
This is some views of the undercarriage on RIGHT:
- Thread starter
- #128
Perspectives: 6BT Frame, Bay & Shifter Locale
And.... some moor views of Undercarriage but on LEFT of rig:
I'm actually REALLY happy with where we ended up moving the engine to----it gave me more room for the exhaust that is to go between the NV4500/Txfr Case and Rail.... good amount of clearance up front between damper and radiator.
All of it, in all .... very happy. It was a drag cutting the mounts and then moving it all from original set, but looking back now...it turned out for the better
And.... some moor views of Undercarriage but on LEFT of rig:
I'm actually REALLY happy with where we ended up moving the engine to----it gave me more room for the exhaust that is to go between the NV4500/Txfr Case and Rail.... good amount of clearance up front between damper and radiator.
All of it, in all .... very happy. It was a drag cutting the mounts and then moving it all from original set, but looking back now...it turned out for the better
- Thread starter
- #129
Perspectives: 6BT Frame, Bay & Shifter Locale
Undercarriage LEFT... more shots
Undercarriage LEFT... more shots
- Thread starter
- #130
Perspectives: 6BT Frame, Bay & Shifter Locale
Some final top views of engine/bay.... and hopefully I'm not duplicating here... lotta views I've put up so far
Note these are a little dated as I've done more since these shots were taken----just trying to catch up with my thread to capture all that soon
Some final top views of engine/bay.... and hopefully I'm not duplicating here... lotta views I've put up so far
Note these are a little dated as I've done more since these shots were taken----just trying to catch up with my thread to capture all that soon
- Thread starter
- #131
Oh when ma pipe is made of meetal - A DownPipe
Makin' some tracks for the darn thing I've been draggin' The Feet on....
Exhaust.
Goin' extra deep on the pics to give some good shots....
Makin' some tracks for the darn thing I've been draggin' The Feet on....
Exhaust.
Goin' extra deep on the pics to give some good shots....
- Thread starter
- #132
Oh when ma pipe is made of meetal - A DownPipe
.... Eey, ya know... extra views to show how one man did it.
.... Eey, ya know... extra views to show how one man did it.
- Thread starter
- #133
Oh when ma pipe is made of meetal - A DownPipe
- Thread starter
- #134
Oh when ma pipe is made of meetal - A DownPipe
- Thread starter
- #135
Oh when ma pipe is made of meetal - A DownPipe
...what is even funnier...is at the time I had no access to power. And... an 8in Mini-Me Hack Saw.
...what is even funnier...is at the time I had no access to power. And... an 8in Mini-Me Hack Saw.
- Thread starter
- #136
Oh when ma pipe is made of meetal - A DownPipe
Duct Taped....
Welded...
By the way, must thank cumminscruiser for his Fine weldin' skills---much appreciated Bro!
Duct Taped....
Welded...
By the way, must thank cumminscruiser for his Fine weldin' skills---much appreciated Bro!
- Thread starter
- #137
Oh when ma pipe is made of meetal - A DownPipe
One with Turbo ...
One with Turbo ...
- Thread starter
- #138
Oh when ma pipe is made of meetal - Rail to Txfr Case Shot
Movin' on to exhaust piece that shoots back from turbo and alongside the tranny and transfer case.... RIGHT side of undercarriage
Movin' on to exhaust piece that shoots back from turbo and alongside the tranny and transfer case.... RIGHT side of undercarriage
- Thread starter
- #139
Oh when ma pipe is made of meetal - Rail to Txfr Case Shot
A Man's got to love the PVC... Life is SO much easier this way...
A Man's got to love the PVC... Life is SO much easier this way...
- Thread starter
- #140
Oh when ma pipe is made of meetal - Rail to Txfr Case Shot
