For Sale Texas 1994 FZJ80 Built Lockers and Lift

SOLD

Current:
210,000 Miles
ARB Front Bumper with bolt on pull tabs
8000# Warn Winch with Factor 55 ProLink
New brakes and Rotors



Added within the last 5,000 Miles:
Slee 4" Lift. $2800
Slee Lower Control Arms $1100
Slee Shocks. $1800
Slee Rear Bumper. $2300
Remote Axle Breathers
Extended Stainless Brake lines
INTI Roof Rack with Light Rack imported from Venezuela. $1500
(4) PIAA Halogen Lights $600
ARB Lockers Front and Rear with ARB Compressor. $2000
Center Differential Lock
ARB Snorkel professionally installed
Nitro 4.88 Gears. $1000
Chromoly Front axles and Birfields. $800
Marks Speedometer Correction
Corbeau GTS II Front Seats with Lumbar Support and Double Locking Sliders $1300
(5) 35 x 12.50r16 Toyo MT on (5) Method Racing Wheels. $2500
LED Interior Lights
LED Reverse Lights
White Knuckle Sliders
New PHH
New Toyota Radiator with Toyota Red Cooland
New Toyota Starter (Ill include the Toyota Starter that I just had rebuilt)
Flowmaster Exhaust
Replaced the 02 Sensors with Toyota Sensors
TJM Yulara Roof Top Tent. $1,000
Synthetic Fluids in Axles, Transfer Case and Diff
Sythetic Engine Oil
NGK Iridium Plugs
Toyota Distributor cap and rotors and wires

Lift, Gearing, Lockers, Axles, Snorkel were professionally installed

No Rust
Body is in great shape
Paint is in good condition with few very small chips


$17,500


$15,500 without the RTT and with the original cloth seats (very good condition) instead of the Corbeau seats

Located in Amarillo Texas.
- 3 and half hours from OKC
- 3 and half hours from Albuquerque
- 6 Hours from Denver



Thank you
Wade
806..... 236 . 3676

 

[texas1880]

 

[HornedOwl]

Great looking FJ. Just watched a video of those seats..."will support up to a 38" waist". I always thought a seat was a seat, good to know how snug they fit.

 

[texas1880]

Thank you Hank !
Good seats make all the difference in comfort . These are my 3rd set of Corbeau Seats that I have installed in different vehicles .

 

[Mdej3]

This is definetlly a great 80 at a great price sir.

Seing that INTI makes me miss my home country...

Really clean built and aftermarket support choices!

Sorry to hear to have to part from her.

Good luck with sale!!!

 

[texas1880]

This is definetlly a great 80 at a great price sir.

Seing that INTI makes me miss my home country...

Really clean built and aftermarket support choices!

Sorry to hear to have to part from her.

Good luck with sale!!!

Thank you

 

[texas1880]

More requested pics

 

[Seehorn12]

What's your asking price without just the RTT? Also, do you happen to have the 3rd row seats?

 

[Blue 62]

Would you trade for an fj62?

 

[texas1880]

What's your asking price without just the RTT? Also, do you happen to have the 3rd row seats?

It does not have the 3rd row seats . I can keep the RTT . Make me an offer. Thank you Wade

 

[texas1880]

Would you trade for an fj62?

View attachment 1518775

Great looking FJ62! I'll pm you

 

[Seehorn12]

In the process of selling my FJ cruiser! Was this your daily? Just curious bc I would be using this as my dd and off-road rig.

Thanks!'

 

[texas1880]

This was not my daily driver . I drove the Land Cruiser on the weekends and occasionally when I wanted to enjoy a drive to work.
Thank you

 

[LockedCollector]

Pictures does not do justice to this beast!

I took a ~1.5hr drive (actually like 3hrs to and fro) to check out this rig myself. This 80 is fully built and built right. Don't know if anyone has added up the top-notch parts Wade has listed but basically the 80 is free! The 80 itself is very very well preserved. Paint is well kept and shiny with some sun spots on the roof, but not noticeable with the awesome rack and rtt. Body is straight. All glass looks good. Undercarriage is clean and did not notice anything concerning. Engine bay is nicely sorted out and no wires hanging or anything like that, hoses looked supple. Even the slight stain on the interior hood insulation panel is exaggerated on the picture.....I was impressed on how dry the engine bay and underbelly looked. Interior is nicely kept up as well. Again not hanging wires, everything nicely tucked. I thought the carpet was replaced as it still looks lush and clean. Seats are new (or at least the look it) and back seats have matching covers. Did not look under covers but bet they are as clean. Didn't notice any modifications on the dash. Only on the gear lever paneling where he had the light and locker switches installed.

Wade was nice enough to let me drive this baby. Engine is steady, and drives well like a beast. Speedo corrected, I was able to bringing it up to highway speed. Going 65mph the RPM was about 2400. It is obviously heavy but we had some dogs cross our paths and the brakes were able to handle the weight plus speed very well. No jerking on the road or play on the steering considering it is running 35" mud tires!

I did not drive the 80 offroad or engage lockers, lights, etc. Would have love to but I was there during the work week with limited time. But this thing seems like it would be unstoppable offroad.

Anyways, just wanted to share. Have never met Wade before and have nothing invested.... just keeping mud real. Reason I do not jump on this is ongoing negotiations with the wife......may move into a 2013+ something platform.

 

[texas1880]

Requested pics of the undercarriage

 

[Robert Herrera]

Bump for an Awesome Rig!

 

[Tennessee80]

Nice truck dude, sweet color!~

 

[Seehorn12]

FJ was for sale but i just can't part with it! This is soooo tempting!

 

[baldilocks]

I'm curious what the castor numbers are? Usually the Slee radius arms are sold with their 6' lift...

 

[texas1880]

The 80 is on its way to a new home in Northern California . I look forward to seeing pictures of it on the trails!

IH8MUD is a great community and thank you to everyone I visited with over the last week .