TE1 - E1 Code Trick

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

May 15, 2005
Is this a stomp test involving the gas pedal or does the CEL start blinking as soon as you short the TE1 and E1 pins?
My recollection of it is: contact on, then short the pins. It should blink then (provided the EFI fuse isn't dead).
Ignition on, but don't start the motor. I put the paperclip in first, then turn the ignition on. Sometimes a little wiggle of the paper clip is required to make contact and set things to blinking.
Simple enough. Thanks. :)

Users who are viewing this thread

Top Bottom