The last time I checked at least the bracket is no longer available from Toyota.
I'm checking into the wiring harness right now.
Mot
Subtank Roof Console Part # 83290-60090
- Thread starter prossett
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
The last time I checked at least the bracket is no longer available from Toyota.
I'm checking into the wiring harness right now.
Mot
Was this the only factory location for the subtank guage? I already have the alti and compass.
Cruiser804
SILVER Star
Actually I have seen a picture somewhere on Mud of the a secondary fuel gauge in the cluster. I don't know that it was for a petrol 80, may have been a diesel.
Hi, Prosset,
would you accept to fax me the diagram ?
I would scan it& post it on Mud for all if you're OK.
My fax# : +33 325 55 79 92.
Thanks!
Luc.
would you accept to fax me the diagram ?
I would scan it& post it on Mud for all if you're OK.
My fax# : +33 325 55 79 92.
Thanks!
Luc.
While i was looking at 80's for sale on Aussie Ebay i spotted a couple of base models (i think they call them standards) which had the subtank gauge incorporated into the main instrument cluster. I think it was in place of the rev counter.
Last edited:
Subtank gauge in main cluster
Heres the diesel 80 of Oz Ebay that has the subtank gauge in place of the rev counter in the main gauge cluster. Note the swing out back doors, and 3rd row seats
Im pretty sure its a base model.
http://cgi.ebay.com.au/1996-toyota-...QQihZ008QQcategoryZ102317QQrdZ1QQcmdZViewItem
Heres the diesel 80 of Oz Ebay that has the subtank gauge in place of the rev counter in the main gauge cluster. Note the swing out back doors, and 3rd row seats
Im pretty sure its a base model.http://cgi.ebay.com.au/1996-toyota-...QQihZ008QQcategoryZ102317QQrdZ1QQcmdZViewItem
Tapage
Club 4X4 Panamá
Heres the diesel 80 of Oz Ebay that has the subtank gauge in place of the rev counter in the main gauge cluster. Note the swing out back doors, and 3rd row seats
http://cgi.ebay.com.au/1996-toyota-...QQihZ008QQcategoryZ102317QQrdZ1QQcmdZViewItem
pretty basic .. no tacho ... nice model to get it in mud
Extremely old thread but can the part number in Post #1 still be had? Is the price still same?
i removed the std roof pod and made this
Are you talking about the OEM console, sub tank meter, or the Mark's 4WD console/CB housing?
I'm sure you can still get any of them...
Mot looked into the meter for the alt/sub earlier this year...
83290-60090 $425
83290-60010 superceded by 83290-60090, which is same as above $425
They can be ordered new from Toyota...not cheap, and you have to wait for it to be made! I have been looking for a used one to pop up since then. Also, you will need the surround (I have that already).
Steve
83290-60090 $425
83290-60010 superceded by 83290-60090, which is same as above $425
They can be ordered new from Toyota...not cheap, and you have to wait for it to be made! I have been looking for a used one to pop up since then. Also, you will need the surround (I have that already).
Steve
I have the JDM one, not with the sub gauge, but with the compass with the OEM console.
Since the compass would be useless w/o the magnetic sensor it would only work for someone who would want to use the altimeter portion of it or just gut it and use it to install radio or aux. meters.
Good luck!!
Mot
Since the compass would be useless w/o the magnetic sensor it would only work for someone who would want to use the altimeter portion of it or just gut it and use it to install radio or aux. meters.
Good luck!!
Mot
Hey Mot...
Can you still get the deluxe visors and or the no frills visors in oak/tan? If so, how much?
The fancy tan/oak have been discontinued for quite some time now.
If you want them you will either have to get the gray ones and re-upholster(sp) or cut your existing ones and sew them back up!
Good luck!!
I was hot and heavy for the same visors but finally got a used set and modified them myself. They are on the work bench in my garage until I find a shop to upholster them for me. I think I am going with a leather look vs the stock material.
Watched an Alti-Sub console for the past week on ebay.com.au...went for $182 OZ, a bit too much for my taste as still would have had to pay freight to the US.
I have a set of non-mirrored ones...decent shape and may put them up for sale. Would rather have my mirrored ones modified to fit the console...lord knows the grief I would get from the
if I took away the vanity mirrors. Gotta keep on her good side, as I almost have her convinced that a Snork is a necessary item. 
Steve
I have a set of non-mirrored ones...decent shape and may put them up for sale. Would rather have my mirrored ones modified to fit the console...lord knows the grief I would get from the
if I took away the vanity mirrors. Gotta keep on her good side, as I almost have her convinced that a Snork is a necessary item. Steve
