Hey Guys,
So, I've scoured this site for the last week about aftermarket wheels that will fit my 89. I've read that long, 20-page thread about wheels that do fit and didn't see what I was looking for. So Im asking for some help, if anyone can you guys can! My wheels are bent from the previous owner, and I'm almost certain at least one is cracked.
I've found three stock-alternatives that look great and seem to have all the specs I'm looking for.
The stock fj62 wheels were:
15x6,
6x5.5 spacing,
with a 3.5 or 3.75 inch backspacing. (I see conflicting numbers everywhere here on this actual number)
Heres the first:
http://www.summitracing.com/parts/usw-75-5760
The second:
http://www.summitracing.com/parts/crr-3155760
The third:
http://www.summitracing.com/parts/usw-37-5760
All three have a center bore large enough and all three have the same specs (though a slightly wider tire of 15x7 instead of 15x6) that would seemingly match the stock size with out any need for spacers or grinding on the calipers or rods.
What do you guys think? Anyone have either of these three on their rig? Did they work without mods?
Thanks guys!
-Todd
So, I've scoured this site for the last week about aftermarket wheels that will fit my 89. I've read that long, 20-page thread about wheels that do fit and didn't see what I was looking for. So Im asking for some help, if anyone can you guys can! My wheels are bent from the previous owner, and I'm almost certain at least one is cracked.
I've found three stock-alternatives that look great and seem to have all the specs I'm looking for.
The stock fj62 wheels were:
15x6,
6x5.5 spacing,
with a 3.5 or 3.75 inch backspacing. (I see conflicting numbers everywhere here on this actual number)
Heres the first:
http://www.summitracing.com/parts/usw-75-5760
The second:
http://www.summitracing.com/parts/crr-3155760
The third:
http://www.summitracing.com/parts/usw-37-5760
All three have a center bore large enough and all three have the same specs (though a slightly wider tire of 15x7 instead of 15x6) that would seemingly match the stock size with out any need for spacers or grinding on the calipers or rods.
What do you guys think? Anyone have either of these three on their rig? Did they work without mods?
Thanks guys!
-Todd