Hey guys I'm in need of a little help here. Ok its a 1983 fj60 with a new rebuilt motor about 1000 miles on it, and rebuilt carb. Everything on it is new belts hoses alt. battery , radiator, fuel pump, filters, changed the oil at about 500 miles. It's running 65-70psi oil presure on cold start up and 55-60 on hwy. I have 17-18kg of vacuum at idle and the idle is set at as close to 650 rpm as I can get. On Friday it started acting like it wanted to die. Bouncing idle from 650 to 1000. I had to feed it gas to get it home. Now today it will fire up first crank but then die off about 10'seconds later. I've done the vacuum leak test spraying all the lines and manafold with carb cleaner and no change in rpm.
Is it a rich/lean issue or could it be my fcs or a fuseable link? Not sure.
Any help would be apreciated
Thanks
-O
Is it a rich/lean issue or could it be my fcs or a fuseable link? Not sure.
Any help would be apreciated
Thanks
-O