Need Help. 2F Howell TBI Fuel Injection system install

[Fast242]

I have an 85 2F and it's currently still carbed and smog pumped. I got a used complete Howell TBI Fuel Injection system from a running 2F pulled for a V8 swap but I did not pull it out. I have about 90% of the wiring figured out (sensors are well marked and obvious what they are), but I have a few wires I need to make sure I have them Identified correctly and so far, Howell and another LC company that sells the Howell systems, have been marginally helpful, and all I have gotten are basic setup instructions but zero complete install instructions or better yet, just a wiring diagram to help pin out my wiring. Searching Mud for the last few hours has been fruitless. Just need either proper install instructions for a 2F, or a wiring diagram. Or someone who has one installed and just quickly point out what I need identified, which should only be a few minutes on a phone call or video call. I will keep searching mud, but hopefully someone here can link or help

Thanks

PJ

 

[SteveH]

@Fast242 - You might use these as a help, since much of the technology is the same.