Looking to buy a head gasket for the older F engine in my 67 FJ45, it has the siamese ports in it. I see specter has a complete engine gasket kit but it's over $200. All I need is the ehad gasket. Where can I buy one? Thanks, Gary
Source for older F engine head gasket
- Thread starter shmukster
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
whitey45
SILVER Star
Last one I needed had to come from spector, but it is oem toyota.
- Thread starter
- #3
Might have found just a head gasket in VA, if not I guess I'll be buying the complete engine overhaul set from Specter
The OEM valvegrind set was still available from Toyota for under $100 the last time I looked.
Found one browsing eBay for $49.00, advertised as new old stock: Cylinder Head Gasket, 58-67 Toyota Land Cruiser FJ40, FJ45, FJ25 F Engine | eBay
- Thread starter
- #6
Ordered one from EBay hope it's good! Thanks, Gary
You sure that's an OEM gasket on eBay? I'm not convinced it is. NOS doesn't mean OEM.
You can get the entire valve grind set at Toyota for $63. It comes with the manifold gaskets and every other gasket you need when pulling the head. It's part number 04112-60062.
You can get the entire valve grind set at Toyota for $63. It comes with the manifold gaskets and every other gasket you need when pulling the head. It's part number 04112-60062.
- Thread starter
- #8
Jeff- thanks for the info. Yeah I know that one isn't OEM. Just actually heard from my Toyota guy about the head kit and am getting one of those too. Thanks again for the info! Gary
