Parting Out SoCal. 1996 LX450, 108,000 miles

[RDangler]

looking for the bezel around the instrument cluster. pretty sure they're all black. has 2 a/c vents. shipped to 85705.

 

[Swbkrn2003]

Do you have the the drivers side master window switch panel? Looking for the grab handle passenger side front or rear. also reat driver's side door panel (in good condition if possible)

 

[jeeprjames]

Do you have the rear left and right ABS sensors?

Thanks, James

 

[cruisersurf]

Looking for the rear wiper arm

 

[mwi555]

Do you have the headlight switch? My high beams don’t work. Curious if you had that part?

 

[jjdeneen918]

Do you have the headlight switch? My high beams don’t work. Curious if you had that part?

I have an entire switch assembly for the steering wheel. Is that what your looking for?

 

[damonhimself]

Front and rear Lexus emblems? The round grill one and the same style one on the rear?

 

[jjdeneen918]

Front and rear Lexus emblems? The round grill one and the same style one on the rear?

Sold.

 

[Uluabob]

Any chance you have the circled brackets for the OEM roof rack? These internal brackets connect the cross bars to the "female" receptacle, thanks

 

[ranma21]

Have the exhaust system?

 

[jjdeneen918]

No to posts 149 & 150.

 

[white thunder]

would you happen to still have the passenger side rear window trim piece (740)? thanks

 

[jjdeneen918]

Nope. Sorry.
Tub was sold with frame & axles.
A lot of those little misc bits are gone.
Unless they are part of the glass assembly. I think I still have both pieces of rear glass.

 

[eric90503]

Whats up buddy. Do you have Drivers Sided 2nd Row Seat hinge brackets (Part that bolts seat to floor)?

 

[jjdeneen918]

Parts inventory update.

 

[DesertCruiser80]

Do you happen to still have the full float rear axle?

 

[jjdeneen918]

Do you happen to still have the full float rear axle?

I don’t. I’m down to the items/pictures just above in my last post.

 

[bucketman]

I'm looking for the inner door seals for the two front doors. The seals on the body, not the seals on the door. They mount on the pinch weld on the top half of the door opening. They will have a tan half that goes over the pinch weld, the other half is black.

From the pictures above it looks like you still have them- in the box in the 1st pic.

Thanks, Dave

 

[jjdeneen918]

I'm looking for the inner door seals for the two front doors. The seals on the body, not the seals on the door. They mount on the pinch weld on the top half of the door opening. They will have a tan half that goes over the pinch weld, the other half is black.

From the pictures above it looks like you still have them- in the box in the 1st pic.

Thanks, Dave

mill be working on my brake conversion tomorrow. I’ll check those seals against my rig’s & confirm those are the corrrct parts.
I’ll let you know.

 

[bucketman]

Did you get a chance to check on those door seals?