slight "clank" when I turn... (1 Viewer)

[rhyary]

I only gave it visual inpection, but I will have to get down there with a wrench to be on the safe side.

https://forum.ih8mud.com/80-series-tech/439621-front-brake-caliper-bolts-loosen.html

 

[Walking Eagle]

If it is more of a single clank, it could be because the upper pan hard rod hole has worked itself into an oval. This sounds funny but my 80 only makes the noise if I am in a parking lot or wheeling hard.

my rear does the same thing, almost no motion can be felt - but if you grab it and push and pull, you can hear the noise.

 

[retrofive]

I ended putting each corner up on jacks one at time to find the clank. It was my upper panhard as well.

 

[sufferinghusband]

pics please

Can someone please put up some pics of what to tighten to get rid of this noise. I am mechanically minded but the terms being used are foreign to me. I am in OZ and not sure of the terminology. Thanks

 

[treerootCO]

Fixed my turning clunk by re-welding the upper pan hard rod mount. The hole had egged itself out and was starting to make awful noises.