Seperating a tub. Looking for advise (1 Viewer)

[Rider4]

I've got a tub that I plan to do a 3/4 separation. It looks like there are bolts on either side of the tub and welds at the seam in front of the doors. Before I dig into this I wanted to reach out to see if there is anything I'm not thinking about. My plan was to grind down the welds at the seam, remove the bolts then happily celebrate this easy job. Let me know what you have done and or experienced with this job.

 

[brian]

Yeah just send it, grinder and cut off wheels got that covered.

 

[RevISK]

Get yourself a handful of good quality spot weld cutters.

Look for all the little dimples, aka, spot welds.

Chip out as much seem sealer as you can first.