For Sale Selling entire FJ40 project (1 Viewer)

[OFF MAP]

Location

United States

I would like to sell it all to one person, however, I may part it out. I had all the axles redone with all new parts, the frame has been sandblasted and painted. I have every part to put it back together new no used parts, that have not been re-conitioned Here is a list of 90% of all the part I have; Dakota Digital Gauge $755, Manafre Tie Rod Kit $465, Advance Adapter Invoice #1 Cross-member $272, Advance Adapter Invoice #2 Orion 4 to 1 transfer case $1899, Advance Adapter Invoice #3 NV 4500 bell housing and many other parts $6782, Advance Adapter Invoice #4 Power steering, radiator $1065, CoolFJ body mound kit $204, Goody front knuckle kit $2808, English paint supplies ONLY $4085 (the good stuff) CoolFJ rain gutter kit $397, Spector Sports bar kit $20, Eastcoast gears invoice #1 $1730, Eastcoast gears invoice #2 Complete 3rd member front and back with ARB lockers front and back with 4:10 gears $3975, CoolFJ hubs $217, Rear fender Flares $355, Cool cruiser weather striping ETC 49 items $3619 JT disk brake kit $1082, SOT power coated Roll cage $535, Rocky Road OME 2 inch lift kit $1599, Cool cruiser winch bumper $268. Classic tube brake lines $321, FJ40 frame boxed Ruffstuff $237, Neil Carson engine (2018 6.2L 18k miles w/computor, etc) $3200, Dustless sandblasting frame and body $1200, 5 Fuel wheels $1250, % BFG KM3 285x70x17 $1495 Parts come to over $40,000.00 I bought the entire FJ 40 for $3300 (great deal) and the labor to paint and bodywork and everything labor (not my labor) was $4500. Total I have over $47,000 cash in this vehicle. All that needs to be done is to put it back together. LOL Anybody up to the challenge? I just do not have the time, know-how, or patience to do it myself. Every part is already painted, I did not wet sand it yet, wanted to wait until it's all put together. I have a ton of more photos, there just painted parts and boxes of the new parts that are still in the boxes. You are welcome to call me if you are interested in buying it. 469-499-4495 Don

 

[Casey E]

Man you’re down to the easy part. Hire someone from the forum to give you a hand one weekend and put it together....

 

[447xpro]

Move this listing to the FJ40 classified

 

[Tank5]

You are so close. Keep it and just focus on accomplishing one piece at time. You could have it done in short order considering where you are now.

 

[MOTOV8R]

I knew there was a reason I don't keep track of the cost of everything I buy for my 40.

GLWS, if you can get it mostly back together (at least running/driving) you'll get a lot more for it.

 

[matp]

I would like to sell it all to one person, however, I may part it out. I had all the axles redone with all new parts, the frame has been sandblasted and painted. I have every part to put it back together new no used parts, that have not been re-conitioned Here is a list of 90% of all the part I have; Dakota Digital Gauge $755, Manafre Tie Rod Kit $465, Advance Adapter Invoice #1 Cross-member $272, Advance Adapter Invoice #2 Orion 4 to 1 transfer case $1899, Advance Adapter Invoice #3 NV 4500 bell housing and many other parts $6782, Advance Adapter Invoice #4 Power steering, radiator $1065, CoolFJ body mound kit $204, Goody front knuckle kit $2808, English paint supplies ONLY $4085 (the good stuff) CoolFJ rain gutter kit $397, Spector Sports bar kit $20, Eastcoast gears invoice #1 $1730, Eastcoast gears invoice #2 Complete 3rd member front and back with ARB lockers front and back with 4:10 gears $3975, CoolFJ hubs $217, Rear fender Flares $355, Cool cruiser weather striping ETC 49 items $3619 JT disk brake kit $1082, SOT power coated Roll cage $535, Rocky Road OME 2 inch lift kit $1599, Cool cruiser winch bumper $268. Classic tube brake lines $321, FJ40 frame boxed Ruffstuff $237, Neil Carson engine (2018 6.2L 18k miles w/computor, etc) $3200, Dustless sandblasting frame and body $1200, 5 Fuel wheels $1250, % BFG KM3 285x70x17 $1495 Parts come to over $40,000.00 I bought the entire FJ 40 for $3300 (great deal) and the labor to paint and bodywork and everything labor (not my labor) was $4500. Total I have over $47,000 cash in this vehicle. All that needs to be done is to put it back together. LOL Anybody up to the challenge? I just do not have the time, know-how, or patience to do it myself. Every part is already painted, I did not wet sand it yet, wanted to wait until it's all put together. I have a ton of more photos, there just painted parts and boxes of the new parts that are still in the boxes. You are welcome to call me if you are interested in buying it. 469-499-4495 Don

View attachment 2713113

I would like to sell it all to one person, however, I may part it out. I had all the axles redone with all new parts, the frame has been sandblasted and painted. I have every part to put it back together new no used parts, that have not been re-conitioned Here is a list of 90% of all the part I have; Dakota Digital Gauge $755, Manafre Tie Rod Kit $465, Advance Adapter Invoice #1 Cross-member $272, Advance Adapter Invoice #2 Orion 4 to 1 transfer case $1899, Advance Adapter Invoice #3 NV 4500 bell housing and many other parts $6782, Advance Adapter Invoice #4 Power steering, radiator $1065, CoolFJ body mound kit $204, Goody front knuckle kit $2808, English paint supplies ONLY $4085 (the good stuff) CoolFJ rain gutter kit $397, Spector Sports bar kit $20, Eastcoast gears invoice #1 $1730, Eastcoast gears invoice #2 Complete 3rd member front and back with ARB lockers front and back with 4:10 gears $3975, CoolFJ hubs $217, Rear fender Flares $355, Cool cruiser weather striping ETC 49 items $3619 JT disk brake kit $1082, SOT power coated Roll cage $535, Rocky Road OME 2 inch lift kit $1599, Cool cruiser winch bumper $268. Classic tube brake lines $321, FJ40 frame boxed Ruffstuff $237, Neil Carson engine (2018 6.2L 18k miles w/computor, etc) $3200, Dustless sandblasting frame and body $1200, 5 Fuel wheels $1250, % BFG KM3 285x70x17 $1495 Parts come to over $40,000.00 I bought the entire FJ 40 for $3300 (great deal) and the labor to paint and bodywork and everything labor (not my labor) was $4500. Total I have over $47,000 cash in this vehicle. All that needs to be done is to put it back together. LOL Anybody up to the challenge? I just do not have the time, know-how, or patience to do it myself. Every part is already painted, I did not wet sand it yet, wanted to wait until it's all put together. I have a ton of more photos, there just painted parts and boxes of the new parts that are still in the boxes. You are welcome to call me if you are interested in buying it. 469-499-4495 Don

View attachment 2713113

Where are you located? Do you have the hard too for sale?

 

[rainingagain]

Agreed this should go to the FJ40 classified section.

I understand that you have a sh!t ton of money into it but what are you looking to get? I don't want to insult you with an offer that's lower than what you have into it, but that's the reality of restoring a car.

I was really into low riders, mini trucks, and the like as a "youth". I'd see guys put, I'm not kidding, 20k into a paint job. Then offload their car for ~5k because they'd get discouraged and not land the project because they were chasing a new carrot. I know I'm comparing apples to oranges here, but you get the idea.

That being said, unless you get it back together and running. Work out the kinks, you aren't going to see a ROI.

 

[patrickhrco]

just wondering... still for sale?

 

[subzali]

Looks like ‘74-later rig with a V8 conversion intended?

 

[patrickhrco]

With the 6.2 I would hope it is older than 75. I’m already dealing with getting my engine swap approved by air care.

 

[OFF MAP]

Where are you located? Do you have the hard too for sale?

In Dallas TX Im not sure what you mean "Hard too...for sale" do you mean a bottom dollar? if this is what you mean then yes

 

[OFF MAP]

just wondering... still for sale?

Yes still for sale I moved it over the classified section.....I will make someone a great deal. Goodys off-road said they would put it all together for me, but I would rather someone have fun and finish it call me if you interested

 

[OFF MAP]

Agreed this should go to the FJ40 classified section.

I understand that you have a sh!t ton of money into it but what are you looking to get? I don't want to insult you with an offer that's lower than what you have into it, but that's the reality of restoring a car.

I was really into low riders, mini trucks, and the like as a "youth". I'd see guys put, I'm not kidding, 20k into a paint job. Then offload their car for ~5k because they'd get discouraged and not land the project because they were chasing a new carrot. I know I'm comparing apples to oranges here, but you get the idea.

That being said, unless you get it back together and running. Work out the kinks, you aren't going to see a ROI.

Make me an offer I know I will lose money....The off-road shop that was going to put it together for me has been putting me off for 4-5 months. At this point, i just want to move it to someone that will finish it

 

[matp]

In Dallas TX Im not sure what you mean "Hard too...for sale" do you mean a bottom dollar? if this is what you mean then yes

Meant Hard Top

 

[rickpaw]

If you decided to part some of it out, I'd be interested in the lockers/3rd members.

 

[OFF MAP]

Meant Hard Top

Yes, I have the hardtop brand new and painted with the new drip rails installed and all with brand new weather stripping everything!!!

 

[OFF MAP]

If you decided to part some of it out, I'd be interested in the lockers/3rd members.

Thanks but not parting this out at all..If I do not sell the whole thing I will have it finished by a shop and then figure it out

 

[OFF MAP]

just wondering... still for sale?

Yes still for sale

 

[rickpaw]

Thanks but not parting this out at all..If I do not sell the whole thing I will have it finished by a shop and then figure it out

Understand, thanks for replying. GLWS

 

[patrickhrco]

@OFF MAP , I had a few questions for you:

Did I miss what year your 40 is?
The rear wheel wells look larger than stock. Are they cut?
Do you have more photos?