Ive just recieved some prado door trims from Canad today which im going to put in my 79 series for a bit of rareness as there are non in Aus, Mainly so i can run elec windows and have some nice door grab handles and map book pocket holders and turf my crap stock flat vinel trims , obviously with these prado trims will be needing to elec window motors and switchs,
i got the passenger switch holder but no mech and for the drivers door i need the switch holder and mechs, As i have a ute ill need a drivers window switchs from a two door prado ,which will be a slim chance so ill proberly have to run 4door switchs and have the rear two window switchs doing nothings.
Questions
1. Does any know if a std cruiser 79 series loom (Non LX) will have any wiring or plugs in the loom under the dash or to the fuse box allready sitting there to accept a sort of plug and play ,or will i have to run a whole new loom for the window motors and switchs
2.Does any one know if the window motors and glass runner are interchanable between full glass doors and door with the quarter window in them.
3.Does any one know if elec window motors from other landcruisers or toyotas are the same , i think i remeber reading some were that toyota cresseda motors are the same
4. Does anyone know if the window mech holder in the post 90 7x series door trims is the same as the 80 series ones they look close .
In Aus we only got elec windows in our mwb and swb heavy duty and bunderas which is only 85-89 and in 02 it was a avl option to order a ute or troopy with them so not to many around so ill proberly be geting bits from a wrecked early one which will more than likely have the full window glass
What are people opinions between haveing the quarta glass and not , any noise difference?
If i keep my quarta window setup ill have to mod the top of the door trims as the go all the way to the top and over the door and that will interfear with the quarta glass from and window runner?
Gotta have a pic ay
i got the passenger switch holder but no mech and for the drivers door i need the switch holder and mechs, As i have a ute ill need a drivers window switchs from a two door prado ,which will be a slim chance so ill proberly have to run 4door switchs and have the rear two window switchs doing nothings.
Questions
1. Does any know if a std cruiser 79 series loom (Non LX) will have any wiring or plugs in the loom under the dash or to the fuse box allready sitting there to accept a sort of plug and play ,or will i have to run a whole new loom for the window motors and switchs
2.Does any one know if the window motors and glass runner are interchanable between full glass doors and door with the quarter window in them.
3.Does any one know if elec window motors from other landcruisers or toyotas are the same , i think i remeber reading some were that toyota cresseda motors are the same
4. Does anyone know if the window mech holder in the post 90 7x series door trims is the same as the 80 series ones they look close .
In Aus we only got elec windows in our mwb and swb heavy duty and bunderas which is only 85-89 and in 02 it was a avl option to order a ute or troopy with them so not to many around so ill proberly be geting bits from a wrecked early one which will more than likely have the full window glass
What are people opinions between haveing the quarta glass and not , any noise difference?
If i keep my quarta window setup ill have to mod the top of the door trims as the go all the way to the top and over the door and that will interfear with the quarta glass from and window runner?
Gotta have a pic ay