Builds Sancho the Pickup Truck Build

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Rear shackles are upside down

Nice build 👍
You are correct sir. I knew that. I don’t know how we let that slip. Let’s please keep that between the two of us.
 
Great info! Thanks for heads up on using 40/55 mounts.

Had I seen this earlier I would have posted this here:

I know nothing about the mounts in the link above. It was just something I found in my searches a couple years ago. This is the only complete set of 45 body mounts (I’m aware of ) that’s still available other than your 40/55 set. Hopefully the info you’ve posted will help someone else in the future
Alright in case anyone was wondering…we used a combination of a front pair of FJ40 body mounts and a pair of round FJ55 body mounts in the rear. There’s only 4 total.

View attachment 3924088
 
Assembly continues. Here’s the driver’s seat mounted. Henry’s head through the back glass if we get in an accident. I’m hoping his mother won’t notice because low back buckets are so cool.

IMG_3935.jpeg


IMG_3936.jpeg
 
Had to do some impromptu body work with a rubber mallet and carpet. The body guy didn’t notice it was crunched up a little bit

IMG_3937.jpeg


IMG_3938.jpeg


IMG_3939.jpeg
 
You can see the before and after on the reveal between the fender and apron. Also compared to the driver’s side.

77438918768__981E1841-9665-45B6-9BDA-9F3F2D600FA6.jpeg


IMG_3944.jpeg


IMG_3946.jpeg


77438918056__4AA0CBCB-9656-43D6-9D32-9E4B0CA73A98.jpeg
 

Users who are viewing this thread

Back
Top Bottom