I am in the process of changing my transmission oil and was following this YoutTube video, . Here we are told that the outlet tube for the transmission cooler is on the passenger side bottom of the radiator (~14:00). However when tracing the oil lines it seems like the said location is an inlet to the cooler and not the outlet.
After tracing the lines it looks like the bottom hose shown below is the actual outlet. However when I turn on the truck and go through the gears I can't get any fluid to flow. I have the pin holding open the "thermostat value". A good photo of this is at (14:24)
Can anyone who has flushed their fluid please provide some clarification? The only thing I can think of is maybe I don't have the thermostat value open all the way open to allow for flow. I just have a paperclip partially stuck in.
After tracing the lines it looks like the bottom hose shown below is the actual outlet. However when I turn on the truck and go through the gears I can't get any fluid to flow. I have the pin holding open the "thermostat value". A good photo of this is at (14:24)
Can anyone who has flushed their fluid please provide some clarification? The only thing I can think of is maybe I don't have the thermostat value open all the way open to allow for flow. I just have a paperclip partially stuck in.