Rear Motor Mount Bolt differences

[Not 4 Pavement]

The SOR and Toyota catalogs list the rear motor mount bolts as different part numbers. This is for the "hockey puck" style motor mount. I can't see why these have different part numbers. Is there a difference? Toyota only carries one...can I just order 2 and use them?

 

[73FJ40]

The original bolts were slightly different lengths, ergo the two part numbers.

I ordered the only remaining available bolt, and, it was the long bolt but with two different cotter pin holes!

Order two and you should be all set.

 

[CHCP]

You can always make your own, that's what I did for my 63, found a hardened bolt the length you want, I double nutted mine and after tightening it up marked the nut and bolt and drilled holes for the cotter pin.

 

[73FJ40]

90102-13010
BOLT, PIN HOLE HEXAG

$7.15 list from Toyota.

 

[Not 4 Pavement]

Thanks for the replies. That helps tremendously!

 

[kunzma]

TTT