Noticed that the top of the rear axle appears greasy. Upon closer inspection, I noticed there is what appears to be a breather tube - a rubber hose with a clamp on it, which goes for about a foot and has a nipple at the end. The grease seems to have spewed out of the port where the hose sits on the axle. The metal clamp is quite loose and is easily squeezed, and the hose rotates freely.
I am wondering if there is any info on what diameter hose this is, where can I get a replacement breather for it, and what's the proper way to check, add, and/or replace the axle fluid.
Any advice would be appreciated.
I am wondering if there is any info on what diameter hose this is, where can I get a replacement breather for it, and what's the proper way to check, add, and/or replace the axle fluid.
Any advice would be appreciated.